✦ LIBER ✦

The stress intensity factors of semi-elliptical cracks in a tubular welded T-joint under axial loading

✍ Scribed by X. Huang; J.W. Hancock

Publisher: Elsevier Science
Year: 1988
Tongue: English
Weight: 867 KB
Volume: 30
Category: Article
ISSN: 0013-7944
DOI: 10.1016/0013-7944(88)90252-4

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Stress intensity factors for longitudina

Stress intensity factors for longitudinal semi-elliptical surface cracks in a pipe under thermal loading

✍ H Greener; U Strathmeier 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 379 KB

intensity factors were calculated at the deepest point and at the surface points of longitudinal semi-elliptical surface cracks in a thermally shocked pipe. The method of calculation is based on weight functions following a proposal by Mattheck, Munz and Stamm, Engng. Fract. Mech. 18, 633-641 (1983)

Calculation of Stress Intensity Factors

Calculation of Stress Intensity Factors for axial semi-elliptical surface cracks in a pipe with cladding loaded thermally

✍ Dr. H. Grebner 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 427 KB 👁 1 views

By means of the weight functions method stress intensity factors were calculated for axial semi-elliptical surface cracks in a pipe with cladding. The component is loaded by a thermoshock. Starting from a stress-free state the inner surface of the cladding is suddenly cooled down. The time-dependent

Calculation of the stress intensity fact

Calculation of the stress intensity factor of a circumferential crack in a tube originating from a hole under axial tensile and bending loads

✍ C. Mattheck; P. Morawietz; D. Munz 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 358 KB