𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The strengthening and toughening mechanism of Fe−Al/Al2O3composite material

✍ Scribed by Sun Kangning; Bi Jianqiang; Liu Rui

Publisher
Wuhan University of Technology
Year
2006
Tongue
English
Weight
880 KB
Volume
21
Category
Article
ISSN
1000-2413

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Toughening in composites of Al2O3 reinfo
Toughening in composites of Al2O3 reinforced with Al
✍ Flinn, B.D.; Rühle, M.; Evans, A.G. 📂 Article 📅 1989 🏛 Elsevier Science ⚖ 838 KB

Ahstrac&---The toughening of A&O, by Al has been investigated, using electron microscopy to provide in sifu measurements of the microstructural parameters that govern ductile ligament toughening. The results are used to compare the measured toughness with values calculated for ligaments that exhibit

Mechanical properties of Al2O3particle-Y
Mechanical properties of Al2O3particle-Y-TZP matrix composite and its toughening mechanism
✍ J. L. Shi; B. S. Li; T. S. Yen 📂 Article 📅 1993 🏛 Springer 🌐 English ⚖ 690 KB

Dense AI203 particle-Y-TZP matrix (AI203 < 40 vol %) composite was prepared by pressureless sintering at 1550~ Composites with 10-30 vol % AI=O 3 particles showed enhanced fracture toughness, bending strength and Vicker's hardness as compared to singlephase Y-TZP. The highest strength (1150 MPa) and

Workability studies on cold upsetting of
Workability studies on cold upsetting of Al–Al2O3 composite material
✍ R. Narayanasamy; T. Ramesh; K.S. Pandey 📂 Article 📅 2006 🏛 Elsevier Science ⚖ 272 KB

Workability is concerned with the extent to which a material can be deformed in a specific metalworking process without the initiation of cracks. The ductile fracture of components is the most common mode of cracks in any metalworking processes. Workability is the complex technological concept, depe