𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The role of calcium gluconate in electrochemical activation of titanium for biomimetic coating of calcium phosphate

✍ Scribed by S. M. A. Shibli; Suja Mathai

Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
403 KB
Volume
87A
Category
Article
ISSN
1549-3296

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Supersaturation of calcium and phosphate in the bath solution and activation of the metal substrate is essential for effective biomimetic growth of apatite on orthopedic implants. In this work, bioactivation of titanium surface was achieved by electrodeposition of a thin layer of calcium phosphate followed by an alkaline treatment to obtain pure hydroxyapatite crystals. The influence of calcium gluconate in the electrolyte solution was evaluated and optimized. Adhesive strength, thickness, structural, and surface characteristics were evaluated. A highly adhesive and uniform layer of hydroxyapatite was formed on titanium surface when the electrodeposition was carried out with an electrolyte solution‐containing calcium gluconate. The electrodeposited hydroxyapatite coatings were subjected for biomimetic growth in Kokubo's simulated body fluid (SBF) and Kokubo's modified SBF containing 1.5 times higher concentration of Ca. Biomimetic growth was also improved by the addition of calcium gluconate in the SBF solution. Β© 2008 Wiley Periodicals, Inc. J Biomed Mater Res 2008

πŸ“œ SIMILAR VOLUMES

Incorporation of bovine serum albumin in
Incorporation of bovine serum albumin in calcium phosphate coating on titanium
✍ Wen, H. B. ;de Wijn, J. R. ;van Blitterswijk, C. A. ;de Groot, K. πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 580 KB

Calcium phosphate (Ca-P) and bovine serum albumin (BSA) were coprecipitated as a coating on commercially pure titanium (cpTi) with a high protein loading (15 wt %) by employing a recently developed wet-chemistry technique. It was observed that the incorporation of BSA significantly modified the morp

Influence of anodization on the adhesion
Influence of anodization on the adhesion of calcium phosphate coatings on titanium substrates
✍ Daniel J. Blackwood; Kar Heng W. Seah πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 279 KB

## Abstract Electrochemical deposition is an attractive technique for the deposition of calcium phosphate, especially hydroxyapatite, on titanium implants. However, the adhesion of these coatings to the titanium substrates needs to be improved for clinical use. It is demonstrated that anodization o

Calcium phosphate deposition on titanium
Calcium phosphate deposition on titanium surfaces in the presence of fibronectin
✍ ValagοΏ½o Amadeu do Serro, Ana Paula ;Fernandes, Anabela Catarino ;de Jesus Vieira πŸ“‚ Article πŸ“… 2000 πŸ› John Wiley and Sons 🌐 English βš– 230 KB πŸ‘ 2 views

Titanium implants are known to nucleate spontaneously a calcium phosphate (apatite-like) layer when in contact with biological model fluids. The presence of proteins either in solution or pre-adsorbed on the titanium surface may influence the process of calcium phosphate deposition. The role of fibr

Healing of gaps around calcium phosphate
Healing of gaps around calcium phosphate-coated implants in trabecular bone of the goat
✍ Clemens, J. A. M. ;Klein, C. P. A. T. ;Sakkers, R. J. B. ;Dhert, W. J. A. ;de Gr πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 518 KB

Hydroxylapatite coatings are under clinical investigation in orthopaedics and dentistry. Bone formation on apatite coatings in the presence of gaps is important for clinical applications. The importance of the stability of the coating is not known at present. By varying the plasma-spray parameters,