𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The repassivation capacity of Stainless steel-ceramic prostheses

✍ Scribed by Dra. M. L. Escudero; Dr. J. A. González; Dr. J. Ruiz

Publisher
John Wiley and Sons
Year
1988
Tongue
German
Weight
484 KB
Volume
39
Category
Article
ISSN
0947-5117

No coin nor oath required. For personal study only.

✦ Synopsis

Desweiteren wurde nachgewiesen, dal3 mit der gleichen Methodik thermohydraulisch bedingte Anreicherungen von Schadstoffen auf den beheizten Oberflachen und in darauf angebrachten Spalten quantitativ untersucht werden konnen. Die in den Spalten durch diese Vorgange bedingten Konzentrationsverteilungen fiihren zu einer Obefflachenverteilung des Chlorids, welche nach Versuchsende mit Hilfe der Autoradiographie sichtbar gemacht werden.

Von besonderer Bedeutung fiir die Anwendung der Methoden ist die Tatsache, daf3 durch Isotopenaustausch eine nachtragliche Markierung der Proben vorgenommen werden kann.

Anhand der Ergebnisse konnten weiterhin bestimmte Vorstellungen zur Wirkungsweise des Chlorids beim lokalen Kor- rosionsprozeB an austenitischen Cr-Ni-Stahlen bei erhohten Temperaturen entwickelt bzw. bestatigt werden. Eine Reihe von offenen Problemen sol1 in weiterfiihrenden Arbeiten noch untersucht werden.

rating Board (1973).

(1981) 513.

📜 SIMILAR VOLUMES

Effects of tungsten and nickel on repass
Effects of tungsten and nickel on repassivation rate of stainless steels in chloride solution by electrochemical method
✍ S.Y. Kim; H. Kim; H.-S. Kwan 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 German ⚖ 368 KB 👁 1 views

## Abstract The recent development of the method for analyzing repassivation rate by a rapid scratch test and high field conduction model makes it possible to predict SCC susceptibility more quantitatively but it is impossible to distinguish the repassivation rates with a little difference due to t

Mechanical properties of phosphate glass
Mechanical properties of phosphate glass-ceramic-316 L stainless steel composites
✍ F. Pernot; R. Rogier 📂 Article 📅 1993 🏛 Springer 🌐 English ⚖ 971 KB

Thermal, elastic and mechanical properties of phosphate glass-ceramic-31 6 L stainless steel particulate composites, prepared by flash-pressing, have been measured. Results have then been explained using various theoretical models. It is shown that particles partly shrink away from the matrix on coo

Resistance of stainless steel CHS column
Resistance of stainless steel CHS columns based on cross-section deformation capacity
✍ Mahmud Ashraf; Leroy Gardner; David A. Nethercot 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 808 KB

A conceptually new structural design approach has recently been proposed by the authors to predict the resistance of stainless steel members subjected to various types of loading with cross-sections formed from thin flat plates including angles, channels, lipped channels, I-sections and rectangular

Finite Element Analysis of the Contact M
Finite Element Analysis of the Contact Mechanics of Ceramic-on-Ceramic Hip Resurfacing Prostheses
✍ Ahmet C. Cilingir 📂 Article 📅 2010 🏛 SciencePress (China) 🌐 English ⚖ 595 KB

Ceramics are good alternative to metal as bearing couple materials because of their better wear resistance. A Finite Element (FE) study was performed to investigate the contact mechanics and stress distribution of Ceramic-on-Ceramic (COC) hip resurfacing prostheses. It was focused in particular on a