✦ LIBER ✦

The production of vapor grown carbon fibers from light paraffins using the liquid pulse injection technique

✍ Scribed by S.R. Mukai; T. Masuda; Y. Fujikata; T. Harada; K. Hashimoto

Publisher: Elsevier Science
Year: 1995
Tongue: English
Weight: 312 KB
Volume: 33
Category: Article
ISSN: 0008-6223
DOI: 10.1016/0008-6223(95)93807-x

No coin nor oath required. For personal study only.

✦ Synopsis

Vapor grown carbon fibers; light paraffins; liquid pulse injection technique

Vapor grown carbon fibers (VGCFs) were successfully produced at high growth rates using light paraffins as the carbon source.

VGCFs grow in the axial direction through the catalytic action of ultra-fine metal particles. They grow in the radial direction as pyrolytic carbon deposits on the side of the primary fiber. Previously, we developed a new method to produce VGCFs at high growth rates,

📜 SIMILAR VOLUMES

The production of vapor grown carbon fib

The production of vapor grown carbon fibers from a mixture of benzene, toluene and xylene using the liquid pulse injection technique

✍ S.R. Mukai; T. Masuda; Y. Fujikata; K. Hashimoto 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 632 KB

Vapor grown carbon fibers were successfully produced from benzene, toluene and xylene, and also from mixtures of these hydrocarbons using the liquid pulse injection technique developed by the authors. This indicates the possibility of the usage of this kind of low-cost material as the carbon source

The liquid pulse injection technique: A

The liquid pulse injection technique: A new method to obtain long vapor grown carbon fibers at high growth rates

✍ T. Masuda; S.R. Mukai; K. Hashimoto 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 564 KB

Long vapor grown carbon fibers (VGCFs) have been obtained using a new method, the liquid pulse injection (LPI) technique. A benzene solution of ferrocene was injected to the surface of the hot wall of the reactor. Ferrocene was rapidly heated and decomposed, yielding ultra-fine iron catalyst particl