𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The processing of fiber reinforced thermoplastics using co-rotating twin screw extruders

✍ Scribed by David Wall

Publisher
Society for Plastic Engineers
Year
1989
Tongue
English
Weight
466 KB
Volume
10
Category
Article
ISSN
0272-8397

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The development of laminar morphology in
The development of laminar morphology in a co-rotating twin screw extruder
✍ O. Rodriguez-Veloz; M. R. Kamal πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 727 KB

Laminar morphology of high-density polyethylene (HDPE)/ polyamide-6 (PA-6) blends was obtained, for the first time, in a co-rotating twin screw extruder. The morphology analysis in the interior of the adapter, which connects the extruder with a slit die, revealed that, under specific processing cond

Velocity measurements in the nip region
Velocity measurements in the nip region of a co-rotating twin-screw extruder using laser Doppler anemometry
✍ M. V. Karwe; S. Bakalis; V. Sernas πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 245 KB πŸ‘ 2 views

The laser Doppler anemometer (LDA) technique has been successfully applied to measure the local velocities in the nip region of a twinscrew extruder. Tangential and axial components of velocity for heavy corn syrup were measured below and on either side of the nip. The experimental data show that th

The Mixing Efficiency of an Eccentric-Di
The Mixing Efficiency of an Eccentric-Disc Kneading Zone in Intermeshing Co- and Counter-Rotating Twin-Screw Extruders
✍ H. Brod; U. Liesenfelder πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 178 KB πŸ‘ 2 views

## Abstract The distributive mixing efficiency of a twin‐screw extruder kneading zone consisting of eccentric disc elements was measured using an online video technique. Both co‐ and counter‐rotation were examined. Viscous Newtonian silicone oil was used as model liquid and black iron oxide pigment

Experimental analysis of the kneading di
Experimental analysis of the kneading disk region in a co-rotating twin screw extruder: Part 2. glass-fiber degradation during compounding
✍ Y. Shimizu; S. Arai; T. Itoyama; H. Kawamoto πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 269 KB πŸ‘ 2 views

The fiber degradation in the kneading disk region of a corotating twin screw extruder was studied with a closed single-stage co-rotating twin screw extruder as a model for the analysis. In a previous article, we reported that the stress in the kneading zone was proportional to the screw torque. In t