𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The influence of a barrel-valve on the degree of fill in a co-rotating twin-screw extruder

✍ Scribed by D.J. van Zuilichem; T. Jager; J.A.J. de Ruig; E.-J. Spaans

Publisher
Elsevier Science
Year
1989
Tongue
English
Weight
759 KB
Volume
10
Category
Article
ISSN
0260-8774

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The development of laminar morphology in
The development of laminar morphology in a co-rotating twin screw extruder
✍ O. Rodriguez-Veloz; M. R. Kamal πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 727 KB

Laminar morphology of high-density polyethylene (HDPE)/ polyamide-6 (PA-6) blends was obtained, for the first time, in a co-rotating twin screw extruder. The morphology analysis in the interior of the adapter, which connects the extruder with a slit die, revealed that, under specific processing cond

Material distribution in the partially f
Material distribution in the partially filled zone of a twin-screw extruder
✍ Robbert A. de Graaf; Dolf. J. Woldringh; LΓ©on P. B. M. Janssen πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 151 KB πŸ‘ 2 views

Simulation of monomeric material transport in reactive extrusion revealed that two different situations can be distinguished in the partially filled zone of a twin-screw extruder. Material is transported from the bottom of the barrel to the top of the screw by drag or material remains on the bottom

Velocity measurements in the nip region
Velocity measurements in the nip region of a co-rotating twin-screw extruder using laser Doppler anemometry
✍ M. V. Karwe; S. Bakalis; V. Sernas πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 245 KB πŸ‘ 2 views

The laser Doppler anemometer (LDA) technique has been successfully applied to measure the local velocities in the nip region of a twinscrew extruder. Tangential and axial components of velocity for heavy corn syrup were measured below and on either side of the nip. The experimental data show that th

Mixing analysis of reactive polymer flow
Mixing analysis of reactive polymer flow in conveying elements of a co-rotating twin screw extruder
✍ David Strutt; Costas Tzoganakis; Thomas A. Duever πŸ“‚ Article πŸ“… 2000 πŸ› John Wiley and Sons 🌐 English βš– 247 KB πŸ‘ 2 views

In this study, the finite element method was used to investigate the effects of screw speed, entering peroxide distribution, and pressure-to-drag flow ratio on the mixing characteristics of steady non-isothermal reactive flows in a forward conveying element of a self-wiping twin screw extruder. The