✦ LIBER ✦

The preparation of low-porosity specimens of titanium and zirconium hydrides by the method of reactive sintering

✍ Scribed by M. M. Antonova

Book ID: 112406207
Publisher: Springer
Year: 1965
Tongue: English
Weight: 535 KB
Volume: 4
Category: Article
ISSN: 1573-9066
DOI: 10.1007/bf00774255

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Dilatometric and thermographic investiga

Dilatometric and thermographic investigation of the reactive sintering of titanium nickelide. I. Production of porous titanium nickelide by reactive sintering

✍ I. F. Martynova; V. Ya. Petrishchev; V. V. Skorokhod 📂 Article 📅 1983 🏛 Springer 🌐 English ⚖ 462 KB

Mechanism of the reduction of zirconium

Mechanism of the reduction of zirconium and titanium oxides by calcium hydride

✍ G. A. Meerson; O. P. Kolchin 📂 Article 📅 1957 🏛 Springer US 🌐 English ⚖ 559 KB

Preparation of the hydrides Mg2FeH6 and

Preparation of the hydrides Mg2FeH6 and Mg2CoH5 by mechanical alloying followed by sintering

✍ J. Huot; H. Hayakawa; E. Akiba 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 274 KB

Effect of the method of preparation on t

Effect of the method of preparation on the surface area and porosity of titanium(IV) phenylphosphonate

✍ María A. Villa-García; Enrique Jaimez; Anatoly Bortun; José R. García; Julio Rod 📂 Article 📅 1995 🏛 Springer 🌐 English ⚖ 317 KB

Characterization and Sintering of Reacti

Characterization and Sintering of Reactive Cerium(IV) Oxide Powders Prepared by the Hydrazine Method

✍ Singo Nakane; Toshiaki Tachi; Masaru Yoshinaka; Ken Hirota; Osamu Yamaguchi 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 751 KB

ChemInform Abstract: Preparation of the

ChemInform Abstract: Preparation of the Hydrides Mg2FeH6 and Mg2CoH5 by Mechanical Alloying Followed by Sintering.

✍ J. HUOT; H. HAYAKAWA; E. AKIBA 📂 Article 📅 2010 🏛 John Wiley and Sons ⚖ 27 KB 👁 1 views

## Preparation of the Hydrides Mg2FeH6 and Mg2CoH5 by Mechanical Alloying Followed by Sintering. -The production of Mg2FeH6 by the title process is significantly enhanced by milling of 2:1 Mg-Fe powder mixtures under H2 atmosphere followed by sintering at 623 K for 1 day under 50 bar H2 pressure.