𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The portevin-le chatelier effects in Cu-Ti, Cu-P and Cu-Si alloys

✍ Scribed by R. Onodera; T. Ishibashi; H. Era; M. Shimizu


Publisher
Elsevier Science
Year
1984
Weight
605 KB
Volume
32
Category
Article
ISSN
0001-6160

No coin nor oath required. For personal study only.

✦ Synopsis


The presence or the absence of the Portevin-Le Chatelier effects in Cu-P, Cu-Ti and Cu-Si alloys were investigated as functions of solute content, temperature and heat treatment. The serrated flows were observed in all the systems but in the Si bearing alloys it appeared at higher solute content and with less height of serration than in the other two. The effect of heat treatment was observed only in Cu-Ti alloys; the P-L effects in 0.5 and 0.757; Ti alloys occurred at lower temperature for annealed specimen than for quenched specimen and in alloys with higher solute content the reverse was true. In Cu-Ti and Cu-Si alloys the minimum temperature above which the P-L effect occurred depended strongly upon solute content. The P-L effect in Cu-Ti alloys occurred at considerably higher temperature than in other copper base alloys. It was concluded that these results were explained more rationally by the cluster theory than the Cottrell theory. RCIpnCNous avons itudie la presence ou I'absence d'effet Portevin et le Chatelier dans des alliages Cu-P, Cu-Ti et Cu-Si en fonction de la teneur en solute. de la temperature et du traitement thermique. Nous avons observe des hachures dans I'ecoulement pour tous ces systimes. mais elles apparaissaient pour une teneur plus Clev&e de solute et avec une plus faible amplitude dans les alliages au silicium que dans les deux autres cas. Nous n'avons observe d'elTet du traitement thermique que dans les alhages Cu-Ti; les effets Portevin et le Chatelier dans les alhages I 05 et 0,75%Ti se produisaient a plus basse temperature pour les tchantillons recuits que pour les echantilions trempes. alors que c'etait le contraire dans les alliages a teneur en solute plus ilev6.e. Dans les alliages Cu-Ti et Cu-Si. la temperature minimale au-dessus de laquelle I'effect Portevin et le Chatelier se produisait dtpendait fortement de la teneur en solute. L'effet Portevin et ie Chatelier se produisait dans les alliages Cu-Ti a une temperature considirablement plus Clevte que dans les autres alliages a base de cuivre. Ces r&hats s'exphquent plus rationnellement par la theorie da amas que par celle de Cottrell.


πŸ“œ SIMILAR VOLUMES


The effect of precipitation hardening on
✍ D.M. Riley; P.G. McCormick πŸ“‚ Article πŸ“… 1977 πŸ› Elsevier Science βš– 751 KB

The influence of precipitation hardening on the characteristics of serrated yielding in an Al-IMg-Si alloy has been investigated. The critical strain at the onset of serrated yielding was increased by ageing and for ageing times longer than 6 hr at 180Β°C serrated yielding was not observed. The strai

The relation between the Portevin-Le cha
✍ R. Onodera; T. Ishibashi; M. Koga; M. Shimizu πŸ“‚ Article πŸ“… 1983 πŸ› Elsevier Science βš– 662 KB

## Bkcts of composition and temperature on the occurrence of the Portevin-Le Chateiier effect were investigated in the literature and the experiments in some alloys. These investigations showed that the alloy systems were divided into two groups according to the minimum solute concentration below