𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The performance of a γ-Al2O3 catalyst for the Claus reaction at low temperature in a fixed bed reactor

✍ Scribed by M. Pineda; J.M. Palacios

Publisher
Elsevier Science
Year
1996
Tongue
English
Weight
645 KB
Volume
136
Category
Article
ISSN
0926-860X

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The preparation of Cu/Al2O3 catalysts vi
The preparation of Cu/Al2O3 catalysts via CVD in a fluidized-bed reactor
✍ Raoul Naumann d’Alnoncourt; Michael Becker; Jelena Sekulic; Roland A. Fischer; M 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 285 KB

Our ongoing study aims at the preparation of a copper catalyst of industrial interest via chemical vapor deposition of metal-organic precursors in a fluidized-bed reactor. In the present contribution, the preparation of Cu/Al 2 O 3 model catalysts is reported. The used CVD precursors are Cu(II) dial

The Synthesis of Highly Loaded Cu/Al2O3
The Synthesis of Highly Loaded Cu/Al2O3 and Cu/ZnO/Al2O3 Catalysts by the Two-Step CVD of CuIIdiethylamino-2-propoxide in a Fluidized-Bed Reactor
✍ Michael Becker; Raoul Naumann d'Alnoncourt; Kevin Kähler; Jelena Sekulic; Roland 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 166 KB 👁 1 views

## Abstract Highly loaded copper catalysts supported on alumina are synthesized applying the cyclic two‐step CVD of the precursor copper(II)diethylamino‐2‐propoxide in a fluidized‐bed reactor. Copper/zinc oxide/alumina composites are synthesized by either the CVD of the precursor bis[bis(trimethyls

A kinetic approach to the temperature-pr
A kinetic approach to the temperature-programmed pyrolysis of low- and high-density polyethylene in a fixed bed reactor: determination of kinetic parameters for the evolution of n-paraffins and 1-olefins
✍ Levent Ballice 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 437 KB

The thermal degradation of both low-density polyethylene (LDPE) and high-density polyethylene (HDPE) have been investigated under non-isothermal conditions. The weight loss data have been analyzed by Flynn and Wall methods. The activation energies for overall degradation of LDPE and HDPE were determ

Methanol steam reforming in supported Pd
Methanol steam reforming in supported Pd membrane reactor The supported Pd membrane is promising for the production of high-purity hydrogen from catalytic steam reforming of methanol. At the 35°C reaction temperature, the catalyst activity and stability are promoted by increasing the alumina content. Here a compact doublejacketed reactor has generated high-purity hydrogen directly from steam reforming of methanol, with no need for external purification and a much higher recovery yield.
📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 110 KB

environments was investigated. The corrosion rate is higher under 'outlet' conditions at 700°C compared to standard conditions at 650°C and 'inlet' conditions at 600°C. The corrosion potential increases with time when a protective corrosion layer is formed. Eventually it reaches a more positive pote