๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

The method of lines for the analysis of composite-metal lossy microstrip lines

โœ Scribed by Bo Gao; Ling Tong; Xun Gong

Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
281 KB
Volume
24
Category
Article
ISSN
0894-3370

No coin nor oath required. For personal study only.

โœฆ Synopsis

Abstract

A fullโ€wave analysis of the compositeโ€metal microstrip lines is presented. The effects of the composite metal to the loss of the microstrip lines are accurately investigated, which are often avoided by other methods. The metal layers of the microstrip lines are considered as lossy inhomogeneous layers. The effects of the thickness of the Au layer and Ti layer are given, respectively. And the reasons that lead to the differences between them are discussed for the first time by analyzing the longitudinal electric field on the strip. The results are compared with other published data. Copyright ยฉ 2010 John Wiley & Sons, Ltd.

๐Ÿ“œ SIMILAR VOLUMES

Hybrid mode analysis of microstrip lines
Hybrid mode analysis of microstrip lines by the method of lines with pseudospectral discretization
โœ R. S. Chen; Z. H. Fan; Edward K. N. Yung; C. H. Chan ๐Ÿ“‚ Article ๐Ÿ“… 2002 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 99 KB ๐Ÿ‘ 1 views

## Abstract In this paper, the method of lines (MoLs), which has been proved to be very efficient for calculating the characteristics of oneโ€dimensional and twoโ€dimensional planar microwave structures, is extended to nonequidistant discretization with pseudospectral technique. This pseudospectral M

Full-wave analysis of microstrip lines o
Full-wave analysis of microstrip lines on a highly lossy substrate
โœ V. V. S. Prakash; Mustafa Kuzuoglu; Raj Mittra ๐Ÿ“‚ Article ๐Ÿ“… 2003 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 209 KB ๐Ÿ‘ 1 views

## Abstract The finiteโ€element method has been used for analyzing open microstrip line structures on highly lossy substrates. The geometry descritization has been carried out by using quadrilateral elements, and the spurious solutions are avoided by employing tangential vector formulation. The diff

Improved finite-element method for the a
Improved finite-element method for the analysis of multilayer coupled cylindrical striplines and microstrip lines
โœ Wenyan Xue; Xikui Ma ๐Ÿ“‚ Article ๐Ÿ“… 2005 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 179 KB ๐Ÿ‘ 1 views

and experimentally studied. The results indicate that with a small spacing of 1 mm between the two PIFAs, good isolation of better than ฯช20 dB for frequencies over the 2.4-and 5-GHz bands can be achieved. Good radiation characteristics for the proposed two integrated PIFAs have also been obtained. T

Design of a periodically nonuniform coup
Design of a periodically nonuniform coupled microstrip lines (PNCML) filter using the novel method of lines
โœ Amr A. Abas; Hossam A. Saker; Esmat A. Abdallah; Hadya M. El-Henawy ๐Ÿ“‚ Article ๐Ÿ“… 2009 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 304 KB

## Abstract A new eigenmode algorithm based on the method of lines and the generalized transmission line equations is applied on fullโ€wave analysis of (3โ€D) MMIC components. The analytical calculation in the direction of propagation enables the analysis of structures of very short or long interconn