๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

The mechanism of crack propagation in ductile metals

โœ Scribed by H.C. Rogers

Publisher
Elsevier Science
Year
1959
Weight
511 KB
Volume
7
Category
Article
ISSN
0001-6160

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Role of plastic work in fatigue crack pr
Role of plastic work in fatigue crack propagation in metals
โœ Y. Izumi; M.E. Fine ๐Ÿ“‚ Article ๐Ÿ“… 1979 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 948 KB

Almract--The plastic work required for a unit area of fatigue crack propagation U was measured by cementing tiny foil strain gages ahead of propagating fati~le cracks and recording the stress-strain curves as the crack approached. Measurements of U and plastic zone size in aluminum alloys 2024-T4, 2

Crack propagation in a liquid metal envi
Crack propagation in a liquid metal environment
โœ N.S Stoloff; T.L Johnston ๐Ÿ“‚ Article ๐Ÿ“… 1963 ๐Ÿ› Elsevier Science โš– 775 KB

A mechanism is advanced for the reduced fracture stress and ductility of metals tested in a liquid metal environment compared to the corresponding properties in air. It is proposed that if the stress necessary to extend 8 craok is calculated on the basis of the rupture of atomic bonds by tensile str

The fracture mechanics of fatigue crack
The fracture mechanics of fatigue crack propagation in compact bone
โœ Wright, T. M. ;Hayes, W. C. ๐Ÿ“‚ Article ๐Ÿ“… 1976 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 511 KB

## Abstract The purpose of this investigation was to apply the techniques of fracture mechanics to a study of fatigue crack propagation in compact bone. Small cracks parallel to the long axis of the bone were initiated in standardized specimens of bovine bone. Crack growth was achieved by cyclicall

Mechanism of corrosion fatigue crack pro
Mechanism of corrosion fatigue crack propagation in high strength steels
โœ Nakasa Keijiro; Takei Hideo; Itoh Hisashi ๐Ÿ“‚ Article ๐Ÿ“… 1983 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 922 KB

The crack propagation velocity in corroGon fatigue (du/dN), were measured on the Ni-Cr-Mo steel quenched and tempered at 473 or 773 K. The steel with high sensitivity to delayed failure reveals the largest (du/dN), under square load and the smaller (da/dN), under positive saw tooth load. The frequen

On the mechanism of crack initiation in
On the mechanism of crack initiation in embrittlement by liquid metals
โœ H. Nichols; W. Rostoker ๐Ÿ“‚ Article ๐Ÿ“… 1961 ๐Ÿ› Elsevier Science โš– 668 KB

It is shown thet while moat commonly brittle fracture by liquid metal wetting will initiate at grain boundaries on the surface of 8 specimen, cracking can, in 8 number of instences, be induced in the centers of greins and out of cony contact with grain boundaries. Studies on 70/30 brass demonstrate