The manufacture of superplastic Magnesium alloy sheet

✍ Scribed by R. Grimes; M. Jackson; B. Moorhouse; R. Dashwood

• Publisher: John Wiley and Sons
• Year: 2008
• Tongue: English
• Weight: 163 KB
• Volume: 39
• Category: Article
• ISSN: 0933-5137
• DOI: 10.1002/mawe.200800302

✦ Synopsis

Abstract

Probably because of their propensity to dynamically recrystallise, superplastic behaviour can be obtained from magnesium alloys considerably more easily than from comparable aluminium alloys. In some cases even as cast magnesium alloys can exhibit reasonable superplasticity and there appears no need for the special alloying additions or complex thermal mechanical treatments required by aluminium alloys such as AA2004 or AA7475. The paper describes the superplastic behaviour (in uniaxial tension) and microstructure of sheet processed from strip cast AZ31 and AZ91. The material was tested in the as‐cast condition and after warm rolling to a number of gauges. Industrially useful superplastic capability was demonstrated in strip cast AZ31 and AZ91 in the as cast condition. Furthermore good superplastic capability was also demonstrated in sheet rolled from the cast metal and the ductilities obtained were not significantly influenced by rolling strain. Twin roll strip casting represents a feasible and simple route for the production of superplastic material either for use in the as cast condition or after rolling to the required gauge.