𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Analysis of Superplastic Deformation of AZ31 Magnesium Alloy

✍ Scribed by F. K. Abu-Farha; M. K. Khraisheh


Publisher
John Wiley and Sons
Year
2007
Tongue
English
Weight
701 KB
Volume
9
Category
Article
ISSN
1438-1656

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


The manufacture of superplastic Magnesiu
✍ R. Grimes; M. Jackson; B. Moorhouse; R. Dashwood 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 163 KB

## Abstract Probably because of their propensity to dynamically recrystallise, superplastic behaviour can be obtained from magnesium alloys considerably more easily than from comparable aluminium alloys. In some cases even as cast magnesium alloys can exhibit reasonable superplasticity and there ap

Enhanced superplastic deformation behavi
✍ L. Saitova; I. Semenova; H.W. Höppel; R. Valiev; M. Göken 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 239 KB

## Abstract The mechanical behavior of the Ti‐6Al‐4V ELI alloy in both conventional grain size (CG) and ultrafine‐grained (UFG) conditions under tension and compression at elevated temperatures (500–800 °C) is considered. Grain refinement by equal‐channel angular pressing (ECAP) followed by multicy

Corrosion of AZ 91 Secondary Magnesium A
✍ C. Scharf; A. Ditze; A. Shkurankov; E. Morales; C. Blawert; W. Dietzel; K. U. Ka 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 506 KB
Forging of Mg-Alloys AZ31 and AZ80
✍ B. Viehweger; A. Karabet; M. Düring;; L. Schaeffer 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 403 KB

Mg-wrought alloys recently became an engineer material of constantly increasing interest. The mechanical properties of extruded Mg-feedstock of the alloys AZ80 and AZ31 indicate their suitability for automotive applications in form of high-quality forgings. Therefore a detailed knowledge about the f