The influence of thiourea on kinetic parameters on the cathodic and anodic reaction at different metals in H2SO4 solution
✍ Scribed by Z.D. Stanković; M. Vuković
- Publisher
- Elsevier Science
- Year
- 1996
- Tongue
- English
- Weight
- 617 KB
- Volume
- 41
- Category
- Article
- ISSN
- 0013-4686
No coin nor oath required. For personal study only.
✦ Synopsis
The effect of addition of thiourea on the kinetics of anodic dissolution and cathodic reaction on copper and iron in acidic sulfate solutions has been studied using potentiodynamic polarization measurements. The results obtained in the presence of thiourea indicate that it has a very strong influence on the kinetics of discharge processes at different metals. The presence of this organic compound led to decreasing exchange current densities and to changes of Tafel slopes. The phenomenon observed is most likely the consequence of strong adsorption of thiourea on the electrode surfaces of investigated metals.
📜 SIMILAR VOLUMES
Ahstract ~ The mechanism for the anodic formation of peroxydisulfate ion on a Ti-supported IrO, electrode was investigated in mixed aqueous solutions of H,SO., (NH&SO4 and NH,F. Peroxydisulfate ion can be formed in higher yield at lower overpotential on the Ti-supported IrO, electrode. comoared with
Polarographic (dc and UC), chronopotentiometric and cyclic voltammetric studies have been carried out to study the reduction of Cd'+, In"+ and Tl+ and several other cations from Ca(NO& .4H,O at 60°C. The diffusion coefficients from different techniques are compared. Br-and tbiourea additions lead to
## Abstract This work presents the electrochemical kinetics results measured during the corrosion of API X52 pipeline steel immersed in aqueous environments, containing dissolved hydrogen sulfide (H~2~S) under turbulent flow conditions. In order to control the turbulent flow conditions, a rotating
Stresses generated during the anodic oxidation of tungsten in 0.1 M H,SO, solution were measured as a function of applied current density and potential step by using a beam deflection technique. The stresses which amounted to a few GPa were developed in the oxide film and were separated into the vol