𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The influence of the ratio of the polyurethane coating components on the quality of finished wood surface

✍ Scribed by M. Jaic; R. Zivanovic

Book ID
105790981
Publisher
Springer-Verlag
Year
1997
Tongue
English
Weight
863 KB
Volume
55
Category
Article
ISSN
0018-3768

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The influence of lubrication on the surf
The influence of lubrication on the surface finish of cold forged components
✍ J. Monaghan; M. O'Reilly πŸ“‚ Article πŸ“… 1996 πŸ› Elsevier Science 🌐 English βš– 912 KB

To establish the influence of lubrication on the surface finish of cold forged components a series of workpieces made of copper, alnminium and heading steel were forged within hexagonal and square shaped dies. Tests were performed under non-lubricated, or "Dry", and lubricated conditions. It was fou

Influence of the viscosity and the subst
Influence of the viscosity and the substrate on the surface hydrophobicity of polyurethane coatings
✍ M. Meincken; A. Klash; S. Seboa; R.D. Sanderson πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 232 KB

Tailor-made polyurethane (PU) dispersions were synthesized as coatings for paperboard for dry food packaging. For this purpose a low moisture-vapor transmission rate and a high surface hydrophobicity are desirable characteristics, which are both met by PU. However, it was found that the surface hydr

Influence of substrate material and surf
Influence of substrate material and surface finishing on the morphology of the calcium-phosphate coating
✍ LeitοΏ½o, E. ;Barbosa, M. A. ;de Groot, K. πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 792 KB

The formation of an apatite-like layer was achieved by immersing Ti-6Al-4V, Ti-Al-2.5Fe, and 316 L stainless-steel substrata in Hank's balanced salt solution (HBSS). The layer was characterized by surface analysis techniques, namely, X-ray microanalysis and X-ray diffraction, and the morphology was

The influence of composition ratio on th
The influence of composition ratio on the morphology of biomedical polyurethanes
✍ Darren J. Martin; Gordon F. Meijs; Pathiraja A. Gunatillake; Setrig P. Yozghatli πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 359 KB πŸ‘ 2 views

Two series of thermoplastic polyurethane elastomers were synthesized from 4,4Ј-methylenediphenyl diisocyanate (MDI), 1,4-butanediol (BDO) chain extender, and each of poly(tetramethylene oxide) (PTMO) and poly(hexamethylene oxide) (PHMO) macrodiols. The PTMO and PHMO molecular weights were kept const