Influence of the viscosity and the substrate on the surface hydrophobicity of polyurethane coatings

✍ Scribed by M. Meincken; A. Klash; S. Seboa; R.D. Sanderson

• Book ID: 104002122
• Publisher: Elsevier Science
• Year: 2006
• Tongue: English
• Weight: 232 KB
• Volume: 253
• Category: Article
• ISSN: 0169-4332
• DOI: 10.1016/j.apsusc.2006.01.014

✦ Synopsis

Tailor-made polyurethane (PU) dispersions were synthesized as coatings for paperboard for dry food packaging. For this purpose a low moisture-vapor transmission rate and a high surface hydrophobicity are desirable characteristics, which are both met by PU. However, it was found that the surface hydrophobicity of water-borne PU dispersions depends strongly on the viscosity of the dispersion. This dependency was studied by static contact angle measurements (SCA) as well as a novel technique using digital pulsed-force mode atomic force microscopy (DPFM-AFM). Comparison of the results validated that DPFM-AFM is a valuable tool to characterize the surface hydrophilicity. Both techniques confirmed that the surface hydrophobicity varies with the viscosity and that an optimum viscosity for the PU coating with a maximum surface hydrophobicity can consequently be determined. It was found that both lower as well as higher viscosities led to a less hydrophobic surface.