To reveal the effect of acid dyes on the melt processing of recycled nylon 66, 17 acid dyes with different chemical structures were used to dye a nylon 66 yarn. The thermal stability of dyestuffs, the thermal degradation of the dyed nylon 66 during compression molding, and the melting and crystalliz
The influence of polymer and dye characteristics on diffusion in nylon 66
β Scribed by G. Chantrey; I. D. Rattee
- Publisher
- John Wiley and Sons
- Year
- 1974
- Tongue
- English
- Weight
- 732 KB
- Volume
- 18
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
## Abstract Our previous work showed that drawing polyamide 66 (PA 66) fibers at room temperature does not change the degree of crystallinity, but only increases the molecular orientation. We therefore have used a series PA 66 fibers with different draw ratios to establish a direct correlation betw
The tracer diffusion coefficients of three S35-labeled dyes in nylon 6 film have been determined. The diffusion coefficients show marked concentration dependence, but this takes a form different from that shown by chloride ions in a related study. It is not possible to explain the data on the basis
The dyeing kinetics of an acid dye (C.I. Acid Blue 40) in a nylon 6 film were investigated using partition-cell and film-roll methods at 80Β°C and pHs 2.3 and 3.05. The concentration dependence of diffusion coefficient of the dye in the nylon substrate measured by both methods was interpreted in term