𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The influence of heat treatment on the pitting corrosion of delta-52 steel in NaOH solutions

✍ Scribed by S.M. Abd El Haleem; S.S. Abd El Rehim; M.Sh. Shalaby

Publisher
Elsevier Science
Year
1984
Weight
394 KB
Volume
23
Category
Article
ISSN
0376-4583

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Studies on the Pitting Corrosion of the
Studies on the Pitting Corrosion of the Delta-52 Steel in aqueous solutions. 2. Variation of the pitting potential in relation to the concentration of the aggressive anion
✍ S. M. Abd El Haleem; S. S. Abd El Reheem; M. Sh. Shalaby; A. M. Azzam πŸ“‚ Article πŸ“… 1976 πŸ› John Wiley and Sons 🌐 German βš– 764 KB

## Abstract Potentiodynamic anodic polarization curves have been traced for an electrode of the steel Delta‐52 (0.40, 0.78Mn, 0.045 S, 0.06P, 0.23 Si): the aggresive media used were potassium hydroxide without and with additions of potassium chloride, bromide and iodide. The oxide film present on t

On the Initiation process of pitting cor
On the Initiation process of pitting corrosion on austenitic stainless steel in chloride solutions
✍ A. A. Seys; A. A. van Haute; M. J. Brabers πŸ“‚ Article πŸ“… 1974 πŸ› John Wiley and Sons 🌐 German βš– 939 KB

## Abstract A literature survey has lead to the conclusion that a theory which postulates an increased anodic reactivity on a local site in the passive film is very probable. Experiments have been set up to confirm these suggestions. By means of the electron‐microanalyser, it is shown that CI^βˆ’^ion

Potentiokinetic Criteria relevant to the
Potentiokinetic Criteria relevant to the pitting corrosion of stainless steels in chloride solutions
✍ Dr. R. Ε tefec πŸ“‚ Article πŸ“… 1982 πŸ› John Wiley and Sons 🌐 German βš– 333 KB πŸ‘ 1 views

## Abstract The adequacy of 7 parameters of potentiokinetic curves for evaluating the resistance to pitting corrosion in sodium chloride solutions was quantitatively assessed by reference to immersion testing in ferric chloride solutions for 11 type CrNi (MoTiCu) stainless steels on the basis of 31

Influence of chromium, molybdenum and co
Influence of chromium, molybdenum and cobalt on the corrosion behaviour of high carbon steels in dependence of heat treatment
✍ S. Peissl; G. Mori; H. Leitner; R. Ebner; S. EglsΓ€er πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 German βš– 373 KB πŸ‘ 1 views

High chromium martensitic steels are designed to provide high corrosion resistance in combination with high strength. Some of these steel grades contain primary carbides for improving the wear resistance, e.g. the steel 440C. The present paper mainly deals with the effect of chemical composition and