𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The influence of ferrite content on the corrosion resistance of austenitic stainless steel in urea synthesis

✍ Scribed by J.M.A Van Der Horst


Publisher
Elsevier Science
Year
1970
Weight
900 KB
Volume
3
Category
Article
ISSN
0026-0800

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Influence of microstructure on the corro
✍ S. S. M. Tavares; J. M. Pardal; E. Ponzio; A. Loureiro; J. A. de Souza πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 German βš– 600 KB

## Abstract Hyperduplex UNS S32707 is a newly developed austenitic–ferritic stainless steel. The steel contains about 27%Cr, 7%Ni, 4.5%Mo, and 0.4%N, which results in a pitting resistance equivalent factor (PRE) equal to 49. In this study, the pitting corrosion resistance of this new grade of stain

The influence of the ferritic and austen
✍ Prof. Dr. L. Vehovar; B. Godec πŸ“‚ Article πŸ“… 1995 πŸ› John Wiley and Sons 🌐 German βš– 870 KB

## Abstract The paper deals with the influence of the Ξ±/gamma; phase ratio and silicon on the corrosion resistance of low carbon alloyed cast steels in strongly oxidizing media. Electrochemical investigations in 65% HNO~3~ + 5g Cr^6+^ ions/I showed that none of the four tested cast steels, with Ξ³~R

Polarization resistance studies on Corro
✍ Hamid A. Al-Megren; Dr. Abdulaziz A. Al-Suhybani πŸ“‚ Article πŸ“… 1993 πŸ› John Wiley and Sons 🌐 English βš– 527 KB

## Abstract The corrosion of 304 Austenitic and 430 Ferritic Stainless steels in sulphuric acid solutions has been investigated using polarization resistance (Rp) technique. Different organic inhibitors were used in this study and these contain an allylic group (CH~2~ ο£Ύ CH~2~ ο£Ώ). The effect of acid