## Abstract Stress corrosion crack velocity and stress corrosion threshold stress intensity have been measured for 18Cr–10Ni–0,5Ti stainless steel in relation to environmental variations. These studies showed that both stage I and stage II growth rate dependence on K are influenced by environmental
Influence of glyoxal on localized corrosion of austenitic stainless steel in spring water
✍ Scribed by V. Alar; I. Juraga; B. Runje; Ž. Alar
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 119 KB
- Volume
- 40
- Category
- Article
- ISSN
- 0933-5137
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract The effect of Mn on the pitting corrosion resistance of 18 8 steels is due to its sulphide forming ability, because the sulphides are then present as non‐metallic inclusions. As is shown by the authors that reduction of the manganese content of these steels (from normally 1.8% to values
## Abstract Corrosion fatigue and fatigue properties of weld‐bonded and spot‐welded austenitic stainless steels EN 1.4301 and EN 1.4318 in 2B or 2F and 2H conditions were investigated. The corrosive environment was 3.5% NaCl solution at + 50 °C. In air the fatigue strengths of the weld‐bonded singl
## Abstract Biometals need high corrosion resistance since metallic implants in the body should be biocompatible and metal ion release should be minimized. In this work, we designed three kinds of super stainless steel and adjusted the alloying elements to obtain different microstructures. Super st