๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

The influence of elevated humidity on the stability of the electret state in polyimide films

โœ Scribed by N. A. Galichin; M. E. Borisova

Book ID
111507415
Publisher
Allerton Press, Inc.
Year
2007
Tongue
English
Weight
179 KB
Volume
78
Category
Article
ISSN
1068-3712

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Effects of temperature/humidity treatmen
Effects of temperature/humidity treatments on the peel strength of CuCr alloy films on polyimide
โœ E. C. Ahn; Jin Yu; I. S. Park ๐Ÿ“‚ Article ๐Ÿ“… 1996 ๐Ÿ› Springer US ๐ŸŒ English โš– 846 KB

A single layer of CuCr alloy was sputter deposited on polyimide films instead of Cu/Cr double layers. The adhesion strengths of the metal/polyimide thin films were measured by the peel test. In order to study the effects of temperature and humidity on the adhesion strength, 85 ~ R.H. (T/H) treatment

Influence of elevated pressure on the st
Influence of elevated pressure on the stability of bubbly flows
โœ H.M. Letzel; J.C. Schouten; C.M. van den Bleek; R. Krishna ๐Ÿ“‚ Article ๐Ÿ“… 1997 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 414 KB

The effect of elevated pressure on the stability of the homogeneous bubbly flow regime in a gas-liquid bubble column is examined. Experiments were performed in a 0.15 m diameter bubble column operated at pressures in the range 0.1-1.3 MPa with nitrogen as the gas phase and water as the liquid phase.