The thermal conductivity of epoxy resins filled with copper powder was measured as a function of grain size and filler concentration between 1.5 and 20 K. In addition, the thermal boundary layer resistance (Kapitza resistance) between epoxy resin and copper was measured. As a consequence of this res
The influence of applied heat flux on the combustion of epoxies
β Scribed by E. D. Nelson; J. L. Williams; Stanley Kaufman
- Publisher
- John Wiley and Sons
- Year
- 1983
- Tongue
- English
- Weight
- 182 KB
- Volume
- 7
- Category
- Article
- ISSN
- 0308-0501
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
## Abstract The exposure tests followed by metallographic evaluation and the electrochemical reactivation measurements in doubleβloop (DLβEPR) modification were used for investigation of the influence of nonβboiling heat transfer on initiation and rate of propagation of intergranular corrosion (IGC
The reactions leading to the propagation of a flame have been studied in shock-heated air containing small amounts of either (normal) octane or 1,1-dimethyl hexane (isooctane). Preflame reactions, associated with the production of excited hydroxyl radicals, have been shown to occur with both octanes
The impact of radiation heat transfer on heterogeneous catalytic oxidation of a fuel on a flat plate is studied. The boundary layer equations are solved numerically for an adiabatic plate. The important nondimensional groups are identified and the results are presented over wide ranges of all these
## Abstract The article deals with the influence of heat flux on localised forms of corrosion of stainless steels under the conditions of phase transition on a metal surface. The observations focused on the influence of the initiation and propagation of pitting corrosion and stress corrosion cracki