𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The formulation of resorcinol-formaldehyde adhestves

✍ Scribed by Hancock, E. G.

Publisher
Wiley (John Wiley & Sons)
Year
1947
Weight
422 KB
Volume
66
Category
Article
ISSN
0368-4075

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

After a brief review of previous work experiments are described showing the effect of formulation and conditions of production on the stability or shelf life of resortinol‐formaldehyde condensation products. Consideration is given at the same time to the best means of causing the condensation product to set to a strong cement. Examples are given, using an asbestos base laminated plastic, of the shear strength of lap joints from suitably formulated cements. The effect of immersion of these joints in boiling water, dilute acids and alkalis and the effect of exposing them to very dry and very humid atmospheres is described.

📜 SIMILAR VOLUMES

Study of the reaction of resorcinol, for
Study of the reaction of resorcinol, formaldehyde, and ammonia
✍ G. E. Van Gils 📂 Article 📅 1969 🏛 John Wiley and Sons 🌐 English ⚖ 838 KB

## Study of the Reaction of Resorcinol, Formaldehyde, and Ammonia G E. VAN GILS, General Tire and Rubber Company, Akron, Ohio &309 synopsis Latex dip adhesives for nylon and rayon tire cords are prepared by reacting resorcinol and formaldehyde in aqueous solution in the presence of a catalyst for

Fabrication of low-density foam shells f
Fabrication of low-density foam shells from resorcinol-formaldehyde aerogel
✍ Stephen M. Lambert; George E. Overturf III; Gerald Wilemski; Stephan A. Letts; D 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 278 KB

Resorcinol-formaldehyde (RF) aerogel chemistry has been used with encapsulation techniques to fabricate low-density, transparent, foam shells. To accomplish this, the gelation time was reduced from several hours to several minutes by the addition of acid following base-catalyzed RF particle growth.

SAXS Study on Gelation Process in Prepar
SAXS Study on Gelation Process in Preparation of Resorcinol–Formaldehyde Aerogel
✍ Hajime Tamon; Hajime Ishizaka 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 115 KB

RF aerogels were prepared by sol-gel polycondensation of resorcinol with formaldehyde in a slightly basic aqueous solution and supercritical drying with carbon dioxide. The aerogels were characterized by nitrogen adsorption and density measurements. A small-angle X-ray scattering (SAXS) technique wa

Influence of Gelation Temperature and Ca
Influence of Gelation Temperature and Catalysts on the Mesoporous Structure of Resorcinol–Formaldehyde Aerogels
✍ Hajime Tamon; Hajime Ishizaka 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 70 KB

Resorcinol-formaldehyde (RF) hydrogels were synthesized by sol-gel polycondensation of resorcinol with formaldehyde using a few kinds of catalysts at a gelation temperature of 238 or 332 K. RF aerogels were prepared by supercritical drying with carbon dioxide. The aerogels were characterized by nitr