✦ LIBER ✦

The effects of process parameters on spatter deposition in laser percussion drilling

✍ Scribed by D.K.Y. Low; L. Li; P.J. Byrd

Publisher: Elsevier Science
Year: 2000
Tongue: English
Weight: 402 KB
Volume: 32
Category: Article
ISSN: 0030-3992
DOI: 10.1016/s0030-3992(00)00079-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The effect of laser peak power and pulse

The effect of laser peak power and pulse width on the hole geometry repeatability in laser percussion drilling

✍ G.K.L. Ng; L. Li 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 576 KB

In this work, the two main factors that in uence the repeatability of the laser percussion drilling process are identiÿed. Experimental parametric analysis was carried out to correlate the laser parameters with the repeatability of a laser percussion drilling process. The experiment was conducted us

Effects of deposition parameters on the

Effects of deposition parameters on the synthesis of Nb3Ge in the CVD process

✍ T. Asano; Y. Tanaka; K. Tachikawa 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 300 KB

The eHects ol cle,,posili(.;n parameters; cm the synthesis ol Nb:.~Ge on the chemical vapour clepositi(in process have been studied. The chlorides, NbCI 5 and GeCI 4, prepared by m sttu chlorlnallun were used The NL~Ge him wa~ depuslled orl a Haslelluy X lal:)e which muved Ihrough a lubular reacllon

Effects of the cladding parameters on th

Effects of the cladding parameters on the deposition efficiency in pulsed Nd:YAG laser cladding

✍ Hyoung-Keun Lee 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 534 KB

The purpose of the present study is to analyze the effects of the cladding parameters on the deposition efficiency in cladding of Co alloy powder by a low power pulsed Nd:YAG laser, and to optimize the cladding parameters for maximizing the deposition efficiency. Experiments were designed, conducte

The effect of process parameters on the

The effect of process parameters on the O/Mo ratio in laser deposition of molybdenum oxides from aqueous solutions

✍ K. Bali; Zs. Geretovszky; A.L. Tóth; T. Szörényi 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 285 KB

Effect of laser processing parameters on

Effect of laser processing parameters on the structure of ductile iron

✍ S.P. Gadag; M.N. Srinivasan; B.L. Mordike 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 967 KB

Laser processing of structure sensitive hypereutectic ductile iron, a cast alloy employed for dynamically loaded automative components, was experimentally investigated over a wide range of process parameters: from power (0.5 2.5 kW) and scan rate (7.5-25 mm s ]) leading to solid state transformation

Analysis of the effects of process param

Analysis of the effects of process parameters on exit burrs in drilling using a combined simulation and experimental approach

✍ L. Ken Lauderbaugh 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 626 KB

Experimental modeling of burr formation processes has received limited industrial application. This limited use is due to the large number of parameters in the experimental design resulting in a large number of experiments and high costs. This paper presents a methodology to combine experimental, si