𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The Effect of Sintering Temperature on Mechanical and Electrical Properties of a W-10Ti Alloy Prepared by Hot Press Sintering

✍ Scribed by Xianzhuo Jie; Shuhua Liang; Qingxiang Wang; Xin Zhao; Zhikang Fan; Xianhui Wang

Publisher
Springer US
Year
2011
Tongue
English
Weight
467 KB
Volume
21
Category
Article
ISSN
1059-9495

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of sintering temperature on the s
Effect of sintering temperature on the structure and properties of polycrystalline cubic boron nitride prepared by SPS
✍ Yucheng Zhao; Mingzhi Wang πŸ“‚ Article πŸ“… 2009 πŸ› Elsevier Science 🌐 English βš– 987 KB

were heated to a sintering temperature between 1250 β€’ C and 1450 β€’ C at a heating rate of 300 β€’ C/min, with a holding time of 5 min in nitrogen atmosphere. The microstructure, phase constitution, microhardness and fracture toughness of the prepared PcBN were then studied. It was shown that the Si 3

Effects of process parameters on electri
Effects of process parameters on electrical properties of n-type Bi2Te3 prepared by mechanical alloying and spark plasma sintering
✍ L.D. Zhao; B.-P. Zhang; J.-F. Li; M. Zhou; W.S. Liu πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 481 KB

n-Type Bi 2 Te 3 thermoelectric materials were prepared by spark plasma sintering (SPS) using mechanically alloyed powders. Seebeck coefficient and electrical conductivity of the resultant materials were measured, with emphasis on the effects of sintering process parameters on the electrical propert