✦ LIBER ✦

The effect of nitrogen and heat treatment on the microstructure and tensile properties of 25Cr–7Ni–1.5Mo–3W–xN duplex stainless steel castings

✍ Scribed by Young-Hwan Park; Zin-Hyoung Lee

Book ID: 108466948
Publisher: Elsevier Science
Year: 2001
Tongue: English
Weight: 846 KB
Volume: 297
Category: Article
ISSN: 0921-5093
DOI: 10.1016/s0921-5093(00)01263-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of heat treatment on microstructu

Effect of heat treatment on microstructure and mechanical properties of duplex stainless steel

✍ S. K. Ghosh; S. Mondal 📂 Article 📅 2008 🏛 Springer-Verlag 🌐 English ⚖ 876 KB

Effects of Cr addition and heat treatmen

Effects of Cr addition and heat treatment on the microstructure and tensile properties of a cast Ti45Al3Cr (at.%) alloy

✍ Y. Zheng; L. Zhao; K. Tangri 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 499 KB

Effect of pouring temperature and heat t

Effect of pouring temperature and heat treatment temperature on the properties of castings in Kh23N28M3D3T steel

✍ V. A. Sintsov; G. M. Ogorodnikova 📂 Article 📅 1970 🏛 Springer 🌐 English ⚖ 411 KB

Effect of nitrogen and nickel on the mic

Effect of nitrogen and nickel on the microstructure and mechanical properties of plasma welded UNS S32760 super-duplex stainless steels

✍ K. Migiakis; G. D. Papadimitriou 📂 Article 📅 2009 🏛 Springer 🌐 English ⚖ 780 KB

Effect of cold work and heat-treatment o

Effect of cold work and heat-treatment on the mechanical properties of a wire drawn metastable stainless steel

✍ John Nunes; Albert Martin 📂 Article 📅 1975 🏛 Springer 🌐 English ⚖ 425 KB

The effect of thermomechanical treatment

The effect of thermomechanical treatment on the interface microstructure and local mechanical properties of roll bonded pure Ti/439 stainless steel multilayered materials

✍ K.S. Lee; D.H. Yoon; S.E. Lee; Y.S. Lee 📂 Article 📅 2011 🏛 Elsevier 🌐 English ⚖ 654 KB

In this study, commercial pure titanium was hot roll bonded with ferritic stainless steel (STS), and subsequently secondary roll bonding process was carried out to fabricate four-ply stainless steel-aluminum-stainless steel-pure titanium multilayered metallic sheet. Interface microstructure between