๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

The effect of machining on the fatigue strength of a gamma titanium aluminide intertmetallic alloy

โœ Scribed by S.A Bentley; A.L Mantle; D.K Aspinwall

Book ID
117681910
Publisher
Elsevier Science
Year
1999
Tongue
English
Weight
139 KB
Volume
7
Category
Article
ISSN
0966-9795

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Effect of stress ratio on fatigue crack
Effect of stress ratio on fatigue crack growth in a titanium aluminide alloy
โœ B. K. Parida; T. Nicholas ๐Ÿ“‚ Article ๐Ÿ“… 1991 ๐Ÿ› Springer Netherlands ๐ŸŒ English โš– 168 KB

Recent studies on fatigue crack growth of an alpha 2 titanium aluminide,Ti-24A1-11Nb intermetallic at room temperature [1-3] indicate a strong dependence of fatigue crack growth rate on the stress ratio, R (ratio of minimum stress to maximum stress) . Figure shows the variation of da/dN with stress

The effects of machined workpiece surfac
The effects of machined workpiece surface integrity on the fatigue life of ฮณ-titanium aluminide
โœ A.R.C Sharman; D.K Aspinwall; R.C Dewes; D Clifton; P Bowen ๐Ÿ“‚ Article ๐Ÿ“… 2001 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 242 KB

Tension-tension tests on turned, electro-chemical machined (ECM) and electro-discharge textured (EDT) specimens made from Ti-45Al-2Nb-2Mn+0.8 vol% TiB 2 alloy, showed the turned specimens to have a higher fatigue strength เท‚475 MPa. It is likely that this was due to the presence of highly compressive