𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The effect of Cu addition on the sintering process and

✍ Scribed by Zongqing Ma; Yongchang Liu; Zhizhong Dong; Liming Yu; Zhiming Gao; Qian Zhao

Publisher
Springer
Year
2009
Tongue
English
Weight
271 KB
Volume
96
Category
Article
ISSN
1432-0630

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of Al addition on the synthesis o
Effect of Al addition on the synthesis of Ti3SiC2 bulk material by pulse discharge sintering process
✍ Songlan Yang; ZhengMing Sun; Qiaoqin Yang; Hitoshi Hashimoto πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 524 KB

Ti 3 SiC 2 bulk materials were synthesized from the starting powders of 1Ti/1Si/2TiC-xAl and 3Ti/1SiC/1C-xAl (molar ratios, x ranges from 0.05 to 0.15) at temperatures between 1100 and 1400 β€’ C for 15 min by pulse discharge sintering technique. X-ray diffraction and scanning electron microscopy were

The effect of Cu addition and milling co
The effect of Cu addition and milling contaminations on the microstructure evolution of ball milled Al–Pb alloy during sintering
✍ M. Zhu; L.Z. Ouyang; Z.F. Wu; M.Q. Zeng; Y.Y. Li; J. Zou πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 855 KB

Al-10 wt.%Pb and Al-10 wt.%Pb-x wt.%Cu (x = 0-7.0) bulk alloys were prepared by sintering the mechanically alloyed powders at various temperatures. The microstructure changes of the as consolidated powders in the course of sintering were analyzed by differential scanning calorimetry, scanning electr