## Abstract The design of a printed slot antenna with dualโband circular polarization (CP) characteristic is presented. The proposed antenna is excited by an Lโshaped strip with a taper end, connected in series to a microstripโlineโfed located along the diagonal line of the squareโslot. Wide impeda
The design of linear and circular polarization for dual band microstrip slot antenna
โ Scribed by Pomsathit, Auttapon; Rakluea, Paitoon; Anantrasirichai, Noppin; Benjangkaprasert, Chawalit; Wakabayashi, Toshio
- Book ID
- 123616594
- Publisher
- John Wiley and Sons
- Year
- 2014
- Tongue
- English
- Weight
- 979 KB
- Volume
- 9
- Category
- Article
- ISSN
- 1931-4973
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
## Abstract A printed slot antenna with broadband circular polarization (CP) is presented. The proposed antenna is excited by an Lโshaped strip with a taper end, connected in series to a microstripโlineโfed located along the diagonal line of the circularโslot. The measured results demonstrated a CP
## A new design of aperture-coupled microstrip antennas for circular polarization (CP) is presented. The CP microstrip antenna is excited by using a series microstrip-line-feed configuration through the coupling of a ring slot in the ground. The effects of different ring-slot sizes on CP performance
The design of a wideband dual-polarized slot-coupled stacked microstrip antenna with high isolation is introduced. The proposed stacked-patch antenna is excited by both open-ended and T-shaped microstrip lines via two H-shaped slots placed orthogonally so as to improve the isolation between the two