The design of a squarer-ring slot antenna for circular polarization
β Scribed by Row, J.-S.
- Book ID
- 118253306
- Publisher
- IEEE
- Year
- 2005
- Tongue
- English
- Weight
- 493 KB
- Volume
- 53
- Category
- Article
- ISSN
- 0018-926X
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
## A new design of aperture-coupled microstrip antennas for circular polarization (CP) is presented. The CP microstrip antenna is excited by using a series microstrip-line-feed configuration through the coupling of a ring slot in the ground. The effects of different ring-slot sizes on CP performance
## Abstract The design of a circularly polarized slot antenna fed by a single microstrip line is presented. The circularly polarized radiation is achieved by means of using a shorted squareβring slot. This proposed antenna has the fundamental resonant frequency of 2.4 GHz with the minimum return lo
## Abstract A simple method for generating circular polarization (CP) radiation from an annularβring slot antenna is described in this paper.The slot antenna is excited by an Lβshaped coupling strip loaded with a resistor. The lengths of the two arms of the coupling strip are the same, and when the
## Abstract Designs of circularly polarized printed shorted annual and square ringβslot antennas are proposed. Circular polarization (CP) radiation of the shorted ringβslot antennas is achieved by selecting a proper length of the shorted section in the ring slot, which is about 3.9 and 8% of the me