## Abstract A printed slot antenna with broadband circular polarization (CP) is presented. The proposed antenna is excited by an L‐shaped strip with a taper end, connected in series to a microstrip‐line‐fed located along the diagonal line of the circular‐slot. The measured results demonstrated a CP
Circular Polarization and Polarization Reconfigurable Designs for Annular Slot Antennas
✍ Scribed by Row, Jeen-Sheen; Liu, Wang-Lin; Chen, Tsair-Rong
- Book ID
- 115506587
- Publisher
- IEEE
- Year
- 2012
- Tongue
- English
- Weight
- 628 KB
- Volume
- 60
- Category
- Article
- ISSN
- 0018-926X
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract A novel design of a microstrip patch antenna incorporated by two orthogonal L‐shaped switchable slots is proposed to achieve circular polarization. Two pin diodes are inserted into these L‐shaped slots and by making these two pin diodes ON and OFF the antenna can radiate with either rig
## Abstract A reconfigurable design is proposed to improve the circular polarization (CP) operating bandwidth of an annular‐ring slot antenna fed with an L‐shaped coupling strip.The design involves four voltage‐controlled varactor diodes, which are placed below the slot and symmetrically distribute
## Abstract A new circular‐polarization (CP) design of an annular‐ring microstrip antenna operating at the fundamental TM~11~ mode is presented. The CP radiation of the proposed design is achieved by connecting an L‐shaped strip to two orthogonal sides of the inner boundary of the annular‐ring patc
## Abstract A compact circularly‐polarized (CP) design of a microstrip patch antennas is presented. The proposed antenna is fed by the coupling of a ring slot in the ground plane of a microstrip line. The results show that the required patch size of the proposed design at a fixed CP operating frequ