✦ LIBER ✦

The design and manufacturing of porous scaffolds for tissue engineering using rapid prototyping

✍ Scribed by S.H. Masood; J.P. Singh; Y. Morsi

Publisher: Springer
Year: 2005
Tongue: English
Weight: 468 KB
Volume: 27
Category: Article
ISSN: 0268-3768
DOI: 10.1007/s00170-004-2187-3

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Modeling of porous structures for rapid

Modeling of porous structures for rapid prototyping of tissue engineering scaffolds

✍ Antonio Armillotta; Ralph Pelzer 📂 Article 📅 2007 🏛 Springer 🌐 English ⚖ 662 KB

Design and preparation of μ-bimodal poro

Design and preparation of μ-bimodal porous scaffold for tissue engineering

✍ A. Salerno; M. Oliviero; E. Di Maio; S. Iannace; P. A. Netti 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 654 KB

Design and fabrication of standardized h

Design and fabrication of standardized hydroxyapatite scaffolds with a defined macro-architecture by rapid prototyping for bone-tissue-engineering research

✍ Wilson, C. E. ;de Bruijn, J. D. ;van Blitterswijk, C. A. ;Verbout, A. J. ;Dhert, 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 460 KB

## Abstract This investigation describes the production and characterization of calcium phosphate scaffolds with defined and reproducible porous macro‐architectures and their preliminary __in vitro__ and __in vivo__ bone‐tissue‐engineered response. Fugitive wax molds were designed and produced usin

Design of porous scaffolds for cartilage

Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique

✍ T.B.F. Woodfield; J. Malda; J. de Wijn; F. Péters; J. Riesle; C.A. van Blittersw 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 796 KB

Development of a Tissue Engineering Scaf

Development of a Tissue Engineering Scaffold Structure Library for Rapid Prototyping. Part 1: Investigation and Classification

✍ C.M. Cheah; C.K. Chua; K.F. Leong; S.W. Chua 📂 Article 📅 2003 🏛 Springer 🌐 English ⚖ 234 KB

An injection molding process for manufac

An injection molding process for manufacturing highly porous and interconnected biodegradable polymer matrices for use as tissue engineering scaffolds

✍ Adam Kramschuster; Lih-Sheng Turng 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 754 KB

## Abstract In this research, injection molding was combined with a novel material combination, supercritical fluid processing, and particulate leaching techniques to produce highly porous and interconnected structures that have the potential to act as scaffolds for tissue engineering applications.