An injection molding process for manufacturing highly porous and interconnected biodegradable polymer matrices for use as tissue engineering scaffolds
✍ Scribed by Adam Kramschuster; Lih-Sheng Turng
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 754 KB
- Volume
- 9999B
- Category
- Article
- ISSN
- 1552-4973
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this research, injection molding was combined with a novel material combination, supercritical fluid processing, and particulate leaching techniques to produce highly porous and interconnected structures that have the potential to act as scaffolds for tissue engineering applications. The foamed structures, molded with polylactide (PLA) and polyvinyl alcohol (PVOH) with salt as the particulate, were processed without the aid of organic solvents, which can be detrimental to tissue growth. The pore size in the scaffolds is controlled by salt particulates and interconnectivity is achieved by the co‐continuous blending morphology of biodegradable PLA matrix with water‐soluble PVOH. Carbon dioxide (CO~2~) at the supercritical state is used to serve as a plasticizer, thereby imparting moldability of blends even with an ultra high salt particulate content, and allows the use of low processing temperatures, which are desirable for temperature‐sensitive biodegradable polymers. Interconnected pores of ∼200 μm in diameter and porosities of ∼75% are reported and discussed. © 2009 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2010