The crystallization mechanism in high strength glass-ceramics
✍ Scribed by Dr. F.-D. Doenitz; Prof. Dr. W. Vogel
- Publisher
- John Wiley and Sons
- Year
- 1980
- Tongue
- English
- Weight
- 342 KB
- Volume
- 15
- Category
- Article
- ISSN
- 0232-1300
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The addition of NiO to a MgOAl~2~Al~2~O~3~SiO~2~ basic glass has an influence on the phase separation and crystallization mechanism. The differentiation of the components already detectable in the amorphous state continues in the crystallization process of the nickel‐rich glasses. The formation of NiAl‐spinel in the bulk restricts the precipitation of high quartz crystals to the skin. The result is a high strength glass‐ceramic with clearly distinguishable bulk and surface regions.
📜 SIMILAR VOLUMES
## Abstract The purpose of this study was to evaluate the effect of crystallization heat treatment on the flexural strength of potassium fluorrichterite glass‐ceramics for biomedical applications. After melting and casting, discs were sectioned from the glass ingots, randomly divided into 10 groups
## Abstract The purpose of this study was to evaluate the effect of sodium content on the crystallization behavior of glass–ceramics in the system SiO~2~‐MgO‐CaO‐Na~2~O‐K~2~O‐F. Five glass compositions were prepared with increasing sodium content. The compositions were melted at 1400 °C for 2 h and
## Abstract High strength oxide ceramic materials like alumina and zirconia are frequently used for artificial joints because of their biocompatibility and high wear resistance. Their suitability as materials for implants and biomedical devices with direct blood contact, such as cardiovascular impl
Table 1. High-temperature polymerization of alkynes and diynes monomer ~~ electric conductivity of polymer film [a] [Sjcm] undoped doped with I, propwe 10-8 l o -' 1-hexyne 10-2 butadiyne 10-8 10 1.5-hexadiyne 10-6 60 [a] Determined with the four-probe technique (4) The reaction time of the polymer