𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Tensile testing of individual ultrathin electrospun poly(L-lactic acid) fibers

✍ Scribed by Dominik Jaeger; Jan Schischka; Jörg Bagdahn; Raimund Jaeger


Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
157 KB
Volume
114
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

The mechanical properties of ultrathin electrospun poly(L‐lactic acid) (PLLA) fibers were studied by performing tensile tests on individual fibers. The tests were carried out on microelectronic mechanical systems (MEMSs) which were developed for characterizing the mechanical properties of thin polymer fibers. Force–displacement curves were obtained from video recordings of the experiments which were carried out in a scanning electron microscope. Each video was processed with an image processing routine to determine the elongation of the fiber and the elastic deformation of a component of the MEMS which yielded the force acting on the specimen. PLLA fibers with diameters ranging from 150 nm to 2 μm were tested. The elastic modulus and the ultimate tensile strength of the fibers increased significantly for fiber diameters below 1 μm. This indicates a higher degree of orientation of the polymer chains in ultrathin fibers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009


📜 SIMILAR VOLUMES


Mechanical properties and structure of t
✍ Hidenori Okuzaki; Isamu Kubota; Toshio Kunugi 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 148 KB 👁 2 views

The zone-drawing (ZD) method was applied three times to the melt-spun poly(L-lactic acid) (PLLA) fibers of low molecular weight (M v ϭ 13,100) at different temperatures under various tensions. The mechanical properties and superstructure of the ZD fibers were investigated. The resulting ZD-3 fiber h

In vitro degradation of poly(L-lactic ac
✍ A. Pegoretti; L. Fambri; C. Migliaresi 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 267 KB 👁 2 views

In vitro degradation of poly( L-lactic acid) fibers was investigated for a period of 16 weeks in Ringer solution at 37ЊC. Two sets of fibers, with similar initial mechanical properties, molar mass, and crystallinity content, but markedly different in diameter (72 and 120 mm) were studied. Viscometri