𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Characterization of poly(L-lactic acid) fibers produced by melt spinning

✍ Scribed by Xiaoyan Yuan; Arthur F. T. Mak; K. W. Kwok; Brian K. O. Yung; Kangde Yao

Publisher
John Wiley and Sons
Year
2001
Tongue
English
Weight
322 KB
Volume
81
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

In vitro degradation of poly(L-lactic ac
In vitro degradation of poly(L-lactic acid) fibers produced by melt spinning
✍ A. Pegoretti; L. Fambri; C. Migliaresi πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 267 KB πŸ‘ 1 views

In vitro degradation of poly( L-lactic acid) fibers was investigated for a period of 16 weeks in Ringer solution at 37ЊC. Two sets of fibers, with similar initial mechanical properties, molar mass, and crystallinity content, but markedly different in diameter (72 and 120 mm) were studied. Viscometri

High speed melt spinning of poly(L-lacti
High speed melt spinning of poly(L-lactic acid) filaments
✍ Khaled Mezghani; J. E. Spruiell πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 198 KB πŸ‘ 1 views

Poly(L-lactic acid) filaments were prepared by high speed melt spinning at take-up velocities up to 5000 m/min. The crystallinity, birefringence, tensile strength, Young's modulus and yield strength all exhibit maxima at take-up velocities between 2000 and 3000 m/min. The boiling water shrinkage exh

Biodegradable fibers of poly(L-lactide)
Biodegradable fibers of poly(L-lactide) produced by high-speed melt spinning and spin drawing
✍ G. Schmack; B. TΓ€ndler; R. Vogel; R. Beyreuther; S. Jacobsen; H.-G. Fritz πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 254 KB πŸ‘ 1 views

A polylactide (PLA type LA 0200 K) was spun in high-speed melt spinning and spin drawing processes. The fibers were characterized with regard to the degree of crystallinity, the orientation, and the textile physical properties. The polymer was produced by a reactive extrusion polymerization process,