Temperature effects in the electrochemical behaviour of cycled lead electrodes in HCl solutions
β Scribed by R.G. Barradas; S. Fletcher
- Publisher
- Elsevier Science
- Year
- 1977
- Tongue
- English
- Weight
- 525 KB
- Volume
- 22
- Category
- Article
- ISSN
- 0013-4686
No coin nor oath required. For personal study only.
β¦ Synopsis
The electrochemical behaviour of cycled lead electrodes has been investigated in HCI soiutions iu the temperature range -6" to 30Β°C. Because of the low ionic strength of solution below -0.8 M, and the associated ir drop problem, solutions stronger than 1.0 M were principally considered. In weaker solutions (0.148 M) only derived current functions were analysed, whilst ail potentiai-dependent parameters were rejected. Results are reported for both stationary and rotating disc electrodes.
Because of the chemical dissolution of the surface layer of PbCi, formed on anodic scan, measurements were confined to time-scales of < 1 s. By applying these strict criteria, the overall reaction scheme was deduced. In particular, the kinetics of passivation were found to involve the three-dimensional
π SIMILAR VOLUMES
km dissolution as well as hydrogen evolution was studied in HCI and HBr acetonitrile solutions in a concentration range between 2.8 x IO-' M and 9.8 x 10m4 M. Halide concentration was changed by adding lithium halide to some of the previous solutions. Measurements were performed at 00Β°C. Current ef
The electrochemical behaviour and corrosion of lead in various concentrations of acetic, lactic (0Γ01 MΓ1Γ0 M), oxalic and tartaric (0Γ01 MΓ0Γ15 M) acid solutions were studied at 25Β‘C by a potentiodynamic method. The lead anode is readily soluble both in acetic and lactic acid solutions up to 2000 m
The electrochemical reduction of the solvated hydrogen ion dissolved in DMSO as HCl was investigated from 25 to 45"C, at different concentrations and ionic strength. Stationary and nonstationary techniques were employed to obtain the kinetic parameters. The results were interpreted with a reaction s
The electrochemical behaviour of copper in 6.0moll-' sulfuric acid at 3o"C, was studied by means of the potentiodynamic method. At low potential sweep rates, u < ZOOmVs-', the data reveal that the anodic process is basically constituted of copper dissolution and a film formation which inhibits furt