𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Temperature compensation for micro-vibration sensor with fiber gratings

✍ Scribed by Xingfa Dong; Yonglin Huang; Kewei Lang; Weigang Zhang; Guiyun Kai; Xiaoyi Dong


Publisher
John Wiley and Sons
Year
2004
Tongue
English
Weight
101 KB
Volume
42
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

A technique for temperature compensation in fiber grating vibration sensor is reported. It uses two FBGs as strain‐differential sensors and its temperature effects are compensated. By using this technique, the total variation in wavelength difference within the range of 3° to 45°C is 0.03 nm, 1/14 of the uncompensated fiber Bragg grating. The output waveform is still distortionless at the vibration frequency up to 715 Hz. The factors affecting the sensitivity and the frequency bandwidth are also discussed. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 42: 474–476, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20341


📜 SIMILAR VOLUMES


Temperature compensation for a fiber-Bra
✍ B. Yi; B. C. B. Chu; K. S. Chiang 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 95 KB

## Abstract We demonstrate two simple techniques for the compensation of the temperature effects in a fiber‐Bragg‐grating‐based magnetostrictive sensor. These techniques are based on using two specially mounted fiber Bragg gratings (FBGs). In one technique, the two FBGs, perpendicular to each other

Temperature-independent vibration sensor
✍ Wenjun Zhou; Xinyong Dong; Changyu Shen; Chun-Liu Zhao; Chi Chiu Chan; Ping Shum 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 395 KB

## Abstract A novel temperature‐independent vibration sensor based on a fiber Bragg grating (FBG) is demonstrated.The FBG was glued in a slanted direction onto the lateral side of a right‐angled triangle cantilever beam. Vertical vibration applied to the cantilever beam leads to a periodical variat

Temperature compensation package for fib
✍ Yonglin Huang; Jie Li; Guiyun Kai; Shuzhong Yuan; Xiaoyi Dong 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 80 KB

## Abstract A new compact package for compensating the temperature dependence of fiber Bragg grating (FBG), based on the use of two materials with different thermal expansion coefficients, has been demonstrated. The dependence of the Bragg wavelength over a temperature range of −18°C to 50°C is onl

Polymer-coated fiber Bragg Grating Senso
✍ Saidi Parne; R. L. N. Sai Prasad; Sen Gupta Dipankar; M. Sai Shankar; Srimannara 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 369 KB

## Abstract Cryogenic temperature sensing has been demonstrated using Polymer coated Fiber Bragg Grating Sensor, and the experimental results are presented in this article. Teflon coating thicknesses of 20 and 40 μ applied on Fiber Bragg Gratings, inscribed in silica fiber (TFBG) are used for these

Temperature-dependent transmittance of c
✍ Hajime Sakata; Kotaro Honda 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 193 KB

## Abstract We propose cascaded long‐period fiber gratings (LPFGs), whose synthesized rejection band alters in bandwidth and loss according to ambient temperature. By using an edge‐emitting light‐emitting diode as an input light source, temperature dependence of the optical power through the cascad

Temperature sensing with different coate
✍ Chulhun Seo; Taesun Kim 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 108 KB

Figure 5 Theoretical and experimental results for the gain of various antenna configurations experiments. The requirements on the ground-plane spacing are more and more relaxed then. REFERENCES 1. L. Giauffret and J.M. Laheurte, Microstrip antennas fed by con-Ž . ductor backed coplanar waveguides, E