Figure 5 Theoretical and experimental results for the gain of various antenna configurations experiments. The requirements on the ground-plane spacing are more and more relaxed then. REFERENCES 1. L. Giauffret and J.M. Laheurte, Microstrip antennas fed by con-Ž . ductor backed coplanar waveguides, E
Polymer-coated fiber Bragg Grating Sensor for cryogenic temperature measurements
✍ Scribed by Saidi Parne; R. L. N. Sai Prasad; Sen Gupta Dipankar; M. Sai Shankar; Srimannarayana Kamineni
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 369 KB
- Volume
- 53
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Cryogenic temperature sensing has been demonstrated using Polymer coated Fiber Bragg Grating Sensor, and the experimental results are presented in this article. Teflon coating thicknesses of 20 and 40 μ applied on Fiber Bragg Gratings, inscribed in silica fiber (TFBG) are used for these studies. It was observed that the sensitivity of Teflon‐coated FBG has been enhanced three times compared to uncoated regular FBGs. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:1154–1157, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.25914
📜 SIMILAR VOLUMES
## Abstract We demonstrate two simple techniques for the compensation of the temperature effects in a fiber‐Bragg‐grating‐based magnetostrictive sensor. These techniques are based on using two specially mounted fiber Bragg gratings (FBGs). In one technique, the two FBGs, perpendicular to each other
## Abstract An embedded dual fiber Bragg gratings sensor for simultaneous measurement of temperature and load (strain) is proposed and experimentally demonstrated. Two nearly identical gratings are mounted on opposite side of an arch‐shaped steel strip. The grating in concave and convex position ex