## Abstract A novel dual‐frequency shorted T‐shaped monopole antenna is proposed. The T‐shaped monopole is comprised of two horizontal arms of different lengths, which generate two separate resonant modes for the desired dual‐frequency operation, and one vertical arm is short‐circuited to a ground
T-shaped monopole antenna with shorted L-shaped strip-sleeves for WLAN 2.4/5.8-GHz operation
✍ Scribed by Jeun-Wen Wu; Yau-Der Wang; Hai-Ming Hsiao; Jui-Han Lu
- Publisher
- John Wiley and Sons
- Year
- 2005
- Tongue
- English
- Weight
- 464 KB
- Volume
- 46
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel dual‐broadband T‐shaped monopole antenna with dual shorted L‐shaped strip‐sleeves for 2.4/5.8‐GHz wireless local area networks (WLANs) is proposed. Dual L‐shaped strip‐sleeves to be shorted with the ground plane are introduced in order to excite the upper resonant mode for operation at the 5.8‐GHz band. The obtained impedance bandwidths reach about 35% for the 2.4‐GHz band and 10.0% for the 5.8‐GHz band, which meets the required bandwidth specifications of the IEEE 802.11a/b/g standards. The measured peak antenna gains for the operating frequencies across dual WLAN bands are measured to be 3.4 and 1.0 dBi, respectively, with gain variations within 0.8 dBi. © 2005 Wiley Periodicals, Inc. Microwave Opt Technol Lett 46: 65–69, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20903
📜 SIMILAR VOLUMES
## Abstract A simple T‐shaped slot antenna for dual‐band wireless local area network (WLAN) application is presented. The T‐shaped slot fed by a rectangular patch produces two resonant frequencies for 2.4‐GHz‐band and 5.2‐GHz‐band operation. The measured impedance bandwidth of the proposed antenna
## Abstract A novel design of dual‐band monopole antenna fed by a coplanar waveguide (CPW) for wireless local area network (WLAN) applications is presented. By using dual L‐shaped strips, the impedance bandwidth of 5 GHz band is significantly increased. The measured impedance bandwidth for −10 dB r
## Abstract A broadband low‐profile printed T‐shaped monopole antenna is presented. It is demonstrated that, by short‐circuiting the central arm of a low‐profile T‐shaped monopole to the ground plane, much improved impedance matching over a wide frequency range can be achieved. A constructed protot
## Abstract This paper proposes a compact printed hook‐shaped monopole antenna for 2.4/5‐GHz WLAN applications. The designed antenna has a compact size with dimensions 26 × 10 × 1 mm^3^. The impedance bandwidth (VSWR < 2) of the proposed antenna is about 170 MHz (2.32–2.49 GHz) for 2.4‐GHz (Bluetoo
## Abstract A novel dual‐band F‐shaped monopole antenna is proposed. The antenna comprises a vertical metal line and two (one upper and one lower) horizontal metal lines of different lengths, which are used for tuning the antenna's first two resonant frequencies to achieve desired dual‐band operati