## Abstract A novel dual‐broadband T‐shaped monopole antenna with dual shorted L‐shaped strip‐sleeves for 2.4/5.8‐GHz wireless local area networks (WLANs) is proposed. Dual L‐shaped strip‐sleeves to be shorted with the ground plane are introduced in order to excite the upper resonant mode for opera
Shorted T-shaped monopole antenna for 2.4/5 GHz WLAN operation
✍ Scribed by Chih-Ming Su; Wen-Shyang Chen; Yuan-Tung Cheng; Kin-Lu Wong
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 79 KB
- Volume
- 41
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel dual‐frequency shorted T‐shaped monopole antenna is proposed. The T‐shaped monopole is comprised of two horizontal arms of different lengths, which generate two separate resonant modes for the desired dual‐frequency operation, and one vertical arm is short‐circuited to a ground plane through an inverted‐L strip for good impedance matching. A prototype suited for WLAN operation in the 2.4‐ and 5‐GHz bands for a laptop as an internal antenna is constructed and tested. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 41: 202–203, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.20093
📜 SIMILAR VOLUMES
## Abstract A simple T‐shaped slot antenna for dual‐band wireless local area network (WLAN) application is presented. The T‐shaped slot fed by a rectangular patch produces two resonant frequencies for 2.4‐GHz‐band and 5.2‐GHz‐band operation. The measured impedance bandwidth of the proposed antenna
## Abstract A broadband low‐profile printed T‐shaped monopole antenna is presented. It is demonstrated that, by short‐circuiting the central arm of a low‐profile T‐shaped monopole to the ground plane, much improved impedance matching over a wide frequency range can be achieved. A constructed protot
## Abstract A simple, bent monopole antenna well useful for WLAN applications in the 2.4 GHz band is presented. The monopole antenna has a rectangular radiating plate in general and is short‐circuited to a small antenna ground and an assembly plate. The assembly plate is not only used as a supporti
## Abstract This paper proposes a compact printed hook‐shaped monopole antenna for 2.4/5‐GHz WLAN applications. The designed antenna has a compact size with dimensions 26 × 10 × 1 mm^3^. The impedance bandwidth (VSWR < 2) of the proposed antenna is about 170 MHz (2.32–2.49 GHz) for 2.4‐GHz (Bluetoo
## Abstract A novel design of dual‐band monopole antenna fed by a coplanar waveguide (CPW) for wireless local area network (WLAN) applications is presented. By using dual L‐shaped strips, the impedance bandwidth of 5 GHz band is significantly increased. The measured impedance bandwidth for −10 dB r