The reactions of LiSi(SiMe 3 ) 3 with Cl(Me) 2 B 3 N 3 (Me) 3 , Cl 2 (Me)B 3 N 3 (Me) 3 , (ClBNMe) 3 , and (ClBNH) 3 result in the formation of molecular species (Me 3 Si) 3 Si(Me) 2 B 3 N 3 (Me) 3 , [(Me 3 Si) 3 Si] 2 (Me)B 3 N 3 (Me) 3 , [(Me 3 Si) 3 SiBNMe] 3 , and [(Me 3 -Si) 3 SiBNH] 3 . The ne
Synthesis of polyborosilazane and its utilization as a precursor to boron nitride
β Scribed by Zeng-Yong Chu; Chun-Xiang Feng; Yong-Cai Song; Xiao-Dong Li; Jia-Yu Xiao
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 125 KB
- Volume
- 94
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
A new kind of polyborosilazane was synthesized from hexamethylcyclotrisilazane by exposure to boron trichloride. The pyrolysis of the precursor was carried out at 1250, 1600, and 1800Β°C in nitrogen for a dwelling time of 1 h. Characterizations were performed with Fourier transform infrared, Xβray photoelectron spectroscopy, thermogravimetric analysis, and XRD techniques, and the results showed that the boron content of the precursor increased as the exposure time increased, whereas the C/Si ratio remained constant. Minor amounts of Si and C remained in residue pyrolyzed at 1250Β°C, but they were completely removed when their residue was further sintered at 1800Β°C. At that point, it only consisted of hexagonal BN crystals. Therefore, the polymer could be used as a precursor to BN in some special applications. Β© 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 105β109, 2004
π SIMILAR VOLUMES
During the solution reaction of NaBH 4 /(NH 4 ) 2 SO 4 in tetraglyme to form borazine, polymeric aminoborane (NH 2 BH 2 ) x has been isolated as a white powder. The powder was characterized by thermal gravimetric analysis/differential scanning calorimetry, infrared and mass spectroscopies, and powde
This communication reports on rapid, efficient synthesis of the metal-organic chemical vapor deposition (MOCVD) precursor (methylcyclopentadienyl)allylplatinum. The compound is shown to be an effective precursor for the deposition of platinum thin films giving deposits of high quality and purity, pr