✦ LIBER ✦

Surface modification of polyimide by ECR plasma

✍ Scribed by Jeong Hyo-Soo; Lu Zhong; Robert C. White

Book ID: 113282044
Publisher: Elsevier Science
Year: 1991
Tongue: English
Weight: 265 KB
Volume: 59-60
Category: Article
ISSN: 0168-583X
DOI: 10.1016/0168-583x(91)95812-r

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Surface interaction of polyimide with ox

Surface interaction of polyimide with oxygen ECR plasma

✍ M. Naddaf; C. Balasubramanian; P.S. Alegaonkar; V.N. Bhoraskar; A.B. Mandle; V. 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 392 KB

Polyimide surface modification by linear

Polyimide surface modification by linear stationary plasma thruster

✍ Won-Kook Choi; Dong-Hee Park 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 437 KB

## Peel strength Roll-to-roll vacuum coater Polyimide Compared to the conventional circular type, the horse-track shaped proto-type linear stationary plasma thruster (LSPT) was designed and fabricated. A cathode with LaB6 emitter was adopted for trapped electron motion along ceramic wall as an elec

Surface modification of polymers by atom

Surface modification of polymers by atomic oxygen using ECR plasma

✍ Riyadh M.A. Abdul majeed; A. Datar; S.V. Bhoraskar; V.N. Bhoraskar 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 814 KB

Modification of sensing properties of me

Modification of sensing properties of metallophthalocyanine by an ECR plasma

✍ M Naddaf; S Chakane; S Jain; S.V Bhoraskar; A.B Mandale 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 132 KB

Surface modification of polyimide films

Surface modification of polyimide films by graft copolymerization

✍ F. C. Loh; C. B. Lau; K. L. Tan; E. T. Kang 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 English ⚖ 615 KB

Surface modification of polyimide films

Surface modification of polyimide films by argon plasma for copper metallization on microelectronic flex substrates

✍ Yung-Sen Lin; Huang-Ming Liu; Hsuan-Ta Chen 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 425 KB 👁 2 views

## Abstract Surface modification of polyimide films such as Kapton E(N) and Upilex S by argon plasma was investigated because of the enhanced adhesive strength with sputtered copper. Peel tests demonstrated this improvement, with a peel strength of 0.7 and 1.2 g/mm for unmodified Kapton E(N) and Up