𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Sulfonation of polysulfones: Suitability of the sulfonated materials for asymmetric membrane preparation

✍ Scribed by J. F. Blanco; Q. T. Nguyen; P. Schaetzel


Publisher
John Wiley and Sons
Year
2002
Tongue
English
Weight
678 KB
Volume
84
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Pervaporation behavior of asymmetric sul
✍ I. S. Byun; I. C. Kim; J. W. Seo πŸ“‚ Article πŸ“… 2000 πŸ› John Wiley and Sons 🌐 English βš– 618 KB

The sulfonation of polymers and the pervaporation behavior of asymmetric polymeric membranes are described in this study. We confirmed that the sulfonic acid group was successively introduced into the polymer chain by FTIR and 1 H-NMR characterization. The phase diagram indicated that the modified p

Preparation of sulfonated polysulfone/po
✍ Ming-Huang Chen; Tze-Chiang Chiao; Tsai-Wie Tseng πŸ“‚ Article πŸ“… 1996 πŸ› John Wiley and Sons 🌐 English βš– 378 KB πŸ‘ 1 views

Sulfonation and amination of polysulfone (PSf) were performed in this study to improve the hydrophilicity of PSf membranes. The sulfonated polysulfone (SPSf) and aminated polysulfone (APSf) membranes with a higher degree of reaction exhibited a higher water flux and worse mechanical strength than th

Mastering Sulfonation of Aromatic Polysu
✍ C. Iojoiu; M. MarΓ©chal; F. Chabert; J.-Y. Sanchez πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 361 KB

## Abstract The publication deals with the sulfonation of aromatic polysulfones that results in ionomers intended to be used as membranes for Proton Exchange Membrane Fuel Cells. The mechanical properties and the lifespan of the membranes depend, in particular, on the mode of synthesis of the ionom

Processing of sulfonated polysulfone for
✍ Philippe BΓ©bin; HervΓ© Galiano πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 200 KB

## Abstract The possibility of manufacturing sulfonated polysulfone (sPSU) membranes by an extrusion process is explored for low‐temperature proton exchange membrane fuel cell applications. Because the acid form of sPSU is not suitable for melt‐phase processing, the use of the salt form of the poly

Preparation and properties of crosslinke
✍ Xuan Zhang; Zhaoxia Hu; Sha Zhang; Shouwen Chen; Shanshan Chen; Jianmei Liu; Lia πŸ“‚ Article πŸ“… 2011 πŸ› John Wiley and Sons 🌐 English βš– 638 KB

Novel multiblock poly(arylene ether sulfone)s were prepared by a two-pot method from a phenoxide-end-capped fully disulfonated poly(arylene ether sulfone) oligomer and a fluoride-end-capped nonsulfonated poly(arylene ether sulfone) oligomer with block length of 10 as the hydrophilic and hydrophobic