The heterogeneous acetal-based membranes containing 50, 60, 70, 80, and 90% (w/w) of the sulfonated polystyrene crosslinked with 7% divinyl benzene were fabricated and studied. In addition, the heterogeneous acetal-based membranes of 85% (w/w) sulfonated polystyrene crosslinked with 1, 4, and 7% div
Preparation and electrochemical characterization of sulfonated polysulfone cation-exchange membranes: Effects of the solvents on the degree of sulfonation
β Scribed by R. K. Nagarale; G. S. Gohil; Vinod K. Shahi; R. Rangarajan
- Publisher
- John Wiley and Sons
- Year
- 2005
- Tongue
- English
- Weight
- 194 KB
- Volume
- 96
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
## Abstract The effects of heat treatment on the properties of membranes prepared from blends of poly(ether sulfone)/sulfonated poly(phenylene sulfide) (SPPS) and phenolphthalein poly(ether ether ketone)/SPPS were studied in detail. The membranes' fundamental properties, including water content, tr
## Abstract A protonβexchange membrane for a direct methanol fuel cell was prepared by modifying the chemical structure of poly(vinyl alcohol) (PVA) via a sulfonation. The sulfonation was carried out by using sulfophthalic acid (sPTA) as a sulfonating agent. The sulfonated PVA membranes, with a var
Sulfonated polyanilines (SPANs) with sulfur-to-nitrogen ratios of 0.05-0.40 were prepared by the copolymerization of aniline (ANI) and 3-aminobenzenesulfonic acid [metanilic acid (MA)] with ammonium peroxodisulfate in 1 M HCl at various MA/ANI and oxidant/monomer ratios and temperatures. The SPANs d
PFA-g-polystyrene graft copolymers were prepared by simultaneous radiation-induced graft copolymerization of styrene onto poly(tetrafluoroethylene-co-perfluorovinyl ether) (PFA) films. The effects of grafting conditions such as monomer concentration, dose, and dose rate were investigated. Three solv