## Abstract **Summary:** The degradation behaviour of a flexible epoxy/amine resin has been studied. The resin, made of DGEBA and polyether diamine (Jeffamine® D2000) has been submitted to photooxidation, photolysis (in absence of oxygen) and thermooxidation experiments. The nature and the mechanis
Study of the Degradation of an Epoxy/Amine Resin, 1
✍ Scribed by Bénédicte Mailhot; Sandrine Morlat-Thérias; Mélanie Ouahioune; Jean-Luc Gardette
- Publisher
- John Wiley and Sons
- Year
- 2005
- Tongue
- English
- Weight
- 345 KB
- Volume
- 206
- Category
- Article
- ISSN
- 1022-1352
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Summary: The degradation of an epoxy/amine resin was studied under photolytic conditions in absence and in presence of oxygen and under thermooxidative conditions. The resin is obtained after curing the diglycidyl ether of bisphenol‐A (DGEBA) with a poly(propylene glycol) which is diamine terminated. The mechanisms of degradation of the two separate components before curing were also investigated. Analysis by IR and UV‐Vis spectroscopies revealed that the oxidation photoproducts detected during the degradation of the epoxy/amine result from the oxidation of the DGEBA part, of the amine crosslinks and, to a lower extent, of the poly(oxypropylene) units. Their mechanism of formation essentially involves chain scission reactions. During irradiation, the yellowing observed is mainly due to the formation of a quinone methide structure. Thermooxidation generates high discoloration with some products only generated in that case. For all experiments, a detailed analysis of the IR spectra is given with the chemical mechanisms of formation of the degradation products.
ATR‐IR spectra of an epoxy/amine sample in the carbonyl region during photooxidation.
magnified imageATR‐IR spectra of an epoxy/amine sample in the carbonyl region during photooxidation.
📜 SIMILAR VOLUMES
## Abstract A special model system based on a diglycidylester (1) and 4,4′‐diaminodiphenylmethane (2) was used to characterize the network structure of epoxy resins. Networks with cure degrees of 0,72 to 0,82 were prepared. These networks could be cleaved by hydrolysis after curing, and the network