𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Study of blends of styrene-butadiene rubber and poly(vinyl chloride): 1. Analysis of bending in the elastic range

✍ Scribed by Pu Zhou; Ti Zhou; Zaijian Sun


Publisher
Elsevier Science
Year
1986
Tongue
English
Weight
523 KB
Volume
27
Category
Article
ISSN
0032-3861

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Comparison of the toughening mechanisms
✍ Liling Zhou; Xin Wang; Yusheng Lin; Jingyi Yang; Qiye Wu 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 623 KB

## Abstract In this study, the influence of chlorinated polyethylene (CPE) and acrylonitrile–butadiene–styrene copolymer (ABS) on the mechanical properties of poly(vinyl chloride) (PVC)/CPE and PVC/ABS hybrids were examined. The experimental results show that the toughness of the hybrids could be m

Rheological studies of the poly(styrene-
✍ Gaurab Das; A. N. Banerjee 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 243 KB 👁 2 views

The rheological studies of the poly(vinyl chloride-co-vinyl acetate) and poly-(styrene-co-acrylonitrile) blends were performed by a Brabender Rheotron at three different temperatures and also at different shear rates. Flow curves of the blends at different temperatures were drawn. The flow behavior

Kinetic investigation of thermooxidative
✍ I. Klarić; U. Roje; N. Stipanelov 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 150 KB 👁 2 views

The thermal degradation of poly(vinyl chloride)/acrylonitrile-butadienestyrene (PVC/ABS) blends of different compositions was investigated by means of isothermal thermogravimetric analysis at temperatures of 210°-240°C in flowing atmosphere of air. The Flynn equation, the method of stationary point,