Comparison of the toughening mechanisms of poly(vinyl chloride)/chlorinated polyethylene and poly(vinyl chloride)/acrylonitrile–butadiene–styrene copolymer blends

✍ Scribed by Liling Zhou; Xin Wang; Yusheng Lin; Jingyi Yang; Qiye Wu

• Publisher: John Wiley and Sons
• Year: 2003
• Tongue: English
• Weight: 623 KB
• Volume: 90
• Category: Article
• ISSN: 0021-8995
• DOI: 10.1002/app.12651

✦ Synopsis

Abstract

In this study, the influence of chlorinated polyethylene (CPE) and acrylonitrile–butadiene–styrene copolymer (ABS) on the mechanical properties of poly(vinyl chloride) (PVC)/CPE and PVC/ABS hybrids were examined. The experimental results show that the toughness of the hybrids could be modified greatly by the introduction of CPE or ABS. The microstructure and impact surfaces of the blends were investigated by scanning electron microscopy and transmission electron microscopy. ABS dispersed in the form of particles or agglomerates in the PVC matrix, and CPE tended to disperse as a net structure. In the tensile test, ABS initiated crazes as stress concentrators to toughen the PVC matrix, whereas CPE, with the PVC matrix together, caused a yield deformation by shear stress to form a shear band. The formation of crazes and shear bands benefited the toughening of PVC, but to the different extent. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 916–924, 2003