𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Compatibility study of recycled poly(vinyl chloride)/styrene-acrylonitrile blends

✍ Scribed by David Garcia; Rafael Balart; Francisco Parres; Juan López

Publisher
John Wiley and Sons
Year
2007
Tongue
English
Weight
430 KB
Volume
106
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Thermooxidative degradation of poly(viny
Thermooxidative degradation of poly(vinyl chloride)/acrylonitrile–butadiene–styrene blends
✍ I. Klarić; U. Roje; M. Bravar 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 402 KB 👁 1 views

The thermal degradation process of poly(viny1 chloride)/acrylonitrile-butadiene-styrene (PVC/ABS) blends was investigated by dynamic thermogravimetric analysis in the temperature range 50-650°C in air. The thermooxidative degradation of PVC/ABS blends of different composition takes place in three st

Rheological studies of the poly(styrene-
Rheological studies of the poly(styrene-co-acrylonitrile) and poly(vinyl chloride-co-vinyl acetate) blends
✍ Gaurab Das; A. N. Banerjee 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 243 KB 👁 2 views

The rheological studies of the poly(vinyl chloride-co-vinyl acetate) and poly-(styrene-co-acrylonitrile) blends were performed by a Brabender Rheotron at three different temperatures and also at different shear rates. Flow curves of the blends at different temperatures were drawn. The flow behavior

Fourier transform infrared spectroscopic
Fourier transform infrared spectroscopic studies of the poly(styrene-co-acrylonitrile) and poly (vinyl chloride-co-vinyl acetate) blends
✍ Gaurab Das; A. N. Banerjee 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 324 KB 👁 2 views

The Fourier transform infrared (FTIR) spectroscopic studies of the poly-(styrene-co-acrylonitrile) (SAN) and poly(vinyl chloride-co-vinyl acetate) (VYHH) blends produced by different blending techniques, viz., solution blending, melt-blending, and also the co-precipitation methods of blending, were

Compatibility of Poly(vinyl chloride-vin
Compatibility of Poly(vinyl chloride-vinyl acetate)/Polyester-based Polyurethane Blends
✍ Jaisankar, S. N.; Lakshminarayana, Y.; Radhakrishnan, Ganga 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 323 KB 👁 2 views

The compatibility of poly(vinyl chlorideÈvinyl acetate) copolymer (P(VC-VA)) with thermoplastic polyurethane elastomers (TPU) was studied using Fourier transform infrared spectroscopy, optical microscopy and solubility parameters. The Gibbs free energy of mixing for the polymerÈsolvent system was ca

Blends of poly(vinyl chloride) with acry
Blends of poly(vinyl chloride) with acrylonitrile-chlorinated polyethylene-styrene copolymer. II. Mechanical properties
✍ Zhikai Zhong; Sixun Zheng; Kejia Yang; Qipeng Guo 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 220 KB 👁 2 views

Blends of poly(vinyl chloride) (PVC) and acrylonitrile-chlorinated polyethylene-styrene (ACS) graft copolymer were prepared by melt blending. Mechanical properties were studied by the use of dynamic mechanical analysis (DMA), impact tests, tensile tests, and scanning electron microscopy (SEM). The D

Compatibility study of waste poly(ethyle
Compatibility study of waste poly(ethylene terephthalate) with poly(vinyl chloride). II
✍ Güneri Akovali; Eminegül Karababa 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 454 KB 👁 1 views

In this study, exploration of possibilities for use of recycled poly(ethylene terephthalate) (PET) in powder form as a filler in the PVC matrix was made. Powdered PET surfaces were modified by plasma to enhance the degree of interaction and, hence, the compatibilities. For modification, a series of